LCG - SE_dpm_oracle - Generic Configuration Reference

Document identifier:	LCG-GIS-CR-SE_dpm_oracle
Date:	16 January 2006
Author:	LCG Deployment - GIS team;Retico,Antonio;Vidic,Valentin;
Version:

Abstract: Configuration steps done by the YAIM script 'configure_SE_dpm_oracle'

Introduction

This document lists the manual steps for the installation and configuration of a LCG SE_dpm_oracle Node.
Furthermore it provides a specification of the YAIM functions used to configure the node with the script-based configuration.

The configuration has been tested on a standard Scientific Linux 3.0 Installation.

Link to this document:
This document is available on the Grid Deployment web site

http://www.cern.ch/grid-deployment/gis/lcg-GCR/index.html

Variables

In order to set-up a SE_dpm_oracle node, you need at least the following variables to be correctly configured in the site configuration file (site-info.def):

BDII_HOST :

BDII Hostname.

CE_BATCH_SYS :

Implementation of site batch system. Available values are ``torque'', ``lsf'', ``pbs'', ``condor'' etc.

CE_CPU_MODEL :

Model of the CPU used by the WN (WN specification). This parameter is a string whose domain is not defined yet in the GLUE Schema. The value used for Pentium III is "PIII".

CE_CPU_SPEED :

Clock frequency in Mhz (WN specification).

CE_CPU_VENDOR :

Vendor of the CPU. used by the WN (WN specification). This parameter is a string whose domain is not defined yet in the GLUE Schema. The value used for Intel is ``intel''.

CE_HOST :

Computing Element Hostname.

CE_INBOUNDIP :

TRUE if inbound connectivity is enabled at your site, FALSE otherwise (WN specification).

CE_MINPHYSMEM :

RAM size in kblocks (WN specification).

CE_MINVIRTMEM :

Virtual Memory size in kblocks (WN specification).

CE_OS :

Operating System name (WN specification).

CE_OS_RELEASE :

Operating System release (WN specification).

CE_OUTBOUNDIP :

TRUE if outbound connectivity is enabled at your site, FALSE otherwise (WN specification).

CE_RUNTIMEENV :

List of software tags supported by the site. The list can include VO-specific software tags. In order to assure backward compatibility it should include the entry 'LCG-2', the current middleware version and the list of previous middleware tags.

CE_SF00 :

Performance index of your fabric in SpecFloat 2000 (WN specification). For some examples of Spec values see http://www.specbench.org/osg/cpu2000/results/cint2000.html.

CE_SI00 :

Performance index of your fabric in SpecInt 2000 (WN specification). For some examples of Spec values see http://www.specbench.org/osg/cpu2000/results/cint2000.html.

CE_SMPSIZE :

Number of cpus in an SMP box (WN specification).

CLASSIC_HOST :

The name of your SE_classic host.

CLASSIC_STORAGE_DIR :

The root storage directory on CLASSIC_HOST.

CRON_DIR :

Yaim writes all cron jobs to this directory. Change it if you want to turn off Yaim's management of cron.

DCACHE_ADMIN :

Host name of the server node which manages the pool of nodes.

DPMDATA :

Directory where the data is stored (absolute path, e.g./storage).

DPMFSIZE :

The maximum file size managed (e.g.200M).

DPMMGR :

db user account for the DPM.

DPMPOOL :

DPMPOOL_NODES :

Space separated list of DPM pool hostname:/path entries".

DPMUSER_PWD :

Password of the db user account.

DPM_HOST :

Host name of the DPM host, used also as a default DPM for the lcg-stdout-mon .

EDG_WL_SCRATCH :

Optional scratch directory for jobs.

EDG_WL_SCRATCH :

Optional scratch directory for jobs.

GLOBUS_TCP_PORT_RANGE :

Port range for Globus IO.

GRIDICE_SERVER_HOST :

GridIce server host name (usually run on the MON node).

GRIDMAP_AUTH :

List of ldap servers in edg-mkgridmap.conf which authenticate users.

GRID_TRUSTED_BROKERS :

List of the DNs of the Resource Brokers host certificates which are trusted by the Proxy node (ex: /O=Grid/O=CERN/OU=cern.ch/CN=host/testbed013.cern.ch).

GROUPS_CONF :

Path to the groups.conf file which contains information on mapping VOMS groups and roles to local groups. An example of this configuration file is given in /opt/lcg/yaim/examples/groups.conf.

GSSKLOG :

yes or no, indicating whether the site provides an AFS authentication server which maps gsi credentials into Kerberos tokens .

GSSKLOG_SERVER :

If GSSKLOG is yes, the name of the AFS authentication server host.

INSTALL_ROOT :

Installation root - change if using the re-locatable distribution.

JAVA_LOCATION :

Path to Java VM installation. It can be used in order to run a different version of java installed locally.

JOB_MANAGER :

The name of the job manager used by the gatekeeper.

LFC_CENTRAL :

A list of VOs for which the LFC should be configured as a central catalogue.

LFC_HOST :

Set this if you are building an LFC_HOST, not if you're just using clients.

LFC_LOCAL :

Normally the LFC will support all VOs in the VOS variable. If you want to limit this list, add the ones you need to LFC_LOCAL. For each item listed in the VOS variable you need to create a set of new variables as follows:

VO_VO-NAME_QUEUES :: The queues that the VO can use on the CE.
VO_VO-NAME_SE :: Default SE used by the VO. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_SGM :: ldap directory with VO software managers list. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_STORAGE_DIR :: Mount point on the Storage Element for the VO. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_SW_DIR :: Area on the WN for the installation of the experiment software. If on the WNs a predefined shared area has been mounted where VO managers can pre-install software, then these variable should point to this area. If instead there is not a shared area and each job must install the software, then this variables should contain a dot ( . ).Anyway the mounting of shared areas, as well as the local installation of VO software is not managed by yaim and should be handled locally by Site Administrators. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_USERS :: ldap directory with VO users list. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_VOMS_POOL_PATH :: If necessary, append this to the VOMS_SERVER URL for the pool account list .
VO_VO-NAME_VOMS_SERVERS :: A list of VOMS servers for the VO.

MON_HOST :

MON Box Hostname.

MY_DOMAIN :

site's domain name.

PX_HOST :

PX hostname.

QUEUES :

The name of the queues for the CE. These are by default set as the VO names.

RB_HOST :

Resource Broker Hostname.

REG_HOST :

RGMA Registry hostname.

SE_LIST :

A list of hostnames of the SEs available at your site.

SITE_EMAIL :

The e-mail address as published by the information system.

SITE_LAT :

Site latitude.

SITE_LOC :

"City, Country".

SITE_LONG :

Site longitude.

SITE_NAME :

Your GIIS.

SITE_SUPPORT_SITE :

Support entry point ; Unique Id for the site in the GOC DB and information system.

SITE_TIER :

Site tier.

SITE_WEB :

Site site.

TORQUE_SERVER :

Set this if your torque server is on a different host from the CE. It is ingored for other batch systems.

USERS_CONF :

Path to the file containing a list of Linux users (pool accounts) to be created. This file should be created by the Site Administrator, which contains a plain list of the users and IDs. An example of this configuration file is given in /opt/lcg/yaim/examples/users.conf.

VOBOX_HOST :

VOBOX hostname.

VOBOX_PORT :

The port the VOBOX gsisshd listens on.

VOS :

List of supported VOs.

VO_SW_DIR :

Directory for installation of experiment software.

Configure Library Paths

Author(s): Retico,Antonio
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_ldconf'.

In order to allow the middleware libraries to be looked up and dinamically linked, the relevant paths need to be configured.

If not already there, append the following lines to the file /etc/ld.so.conf
```
<INSTALL_ROOT>/globus/lib
<INSTALL_ROOT>/edg/lib
<INSTALL_ROOT>/lcg/lib 
/usr/local/lib 
/usr/kerberos/lib
/usr/X11R6/lib
/usr/lib/qt-3.1/lib
/opt/gcc-3.2.2/lib
```
where <INSTALL_ROOT> is the installation root of the lcg middleware (/opt by default).
Run the command:
```
> /sbin/ldconfig -v
```
(this command produces a huge amount of output)

Specification of function: config_ldconf

The function 'config_ldconf' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_ldconf

The code is reproduced also in 24.1..

Set-up EDG configuration variables

Author(s): Retico,Antonio
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_sysconfig_edg'.

The EDG configuration file is parsed by EDG daemons to locate the EDG root directory and various other global properties.

Create and edit the file /etc/sysconfig/edg as follows:

EDG_LOCATION=<INSTALL_ROOT>/edg
EDG_LOCATION_VAR=<INSTALL_ROOT>/edg/var
EDG_TMP=/tmp
X509_USER_CERT=/etc/grid-security/hostcert.pem
X509_USER_KEY=/etc/grid-security/hostkey.pem
GRIDMAP=/etc/grid-security/grid-mapfile
GRIDMAPDIR=/etc/grid-security/gridmapdir/

where <INSTALL_ROOT> is the installation root of the lcg middleware (/opt by default).

NOTE: it might be observed that some of the variables above listed dealing with the GSI (Grid Security Interface) are needed just on service nodes (e.g. CE, RB) and not on others. Nevertheless, for sake of simplicity, yaim uses the same definitions on all node types, which has been proven not to hurt.

Specification of function: config_sysconfig_edg

The function 'config_sysconfig_edg' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_sysconfig_edg

The code is reproduced also in 24.2..

Set-up Globus configuration variables

Author(s): Retico,Antonio
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_sysconfig_globus'.

Create and edit the file /etc/sysconfig/globus as follows:

GLOBUS_LOCATION=<INSTALL_ROOT>/globus
GLOBUS_CONFIG=/etc/globus.conf
GLOBUS_TCP_PORT_RANGE="20000 25000"
export LANG=C

where <INSTALL_ROOT> is the installation root of the lcg middleware (/opt by default).

Specification of function: config_sysconfig_globus

The function 'config_sysconfig_globus' needs the following variables to be set in the configuration file:

GLOBUS_TCP_PORT_RANGE :: Port range for Globus IO.
INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_sysconfig_globus

The code is reproduced also in 24.3..

Set-up LCG configuration variables

Author(s): Retico,Antonio
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_sysconfig_lcg'.

Create and edit the file /etc/sysconfig/lcg as follows:

LCG_LOCATION=<INSTALL_ROOT>/lcg
LCG_LOCATION_VAR=<INSTALL_ROOT>/lcg/var
LCG_TMP=/tmp

where <INSTALL_ROOT> is the installation root of the lcg middleware (/opt by default).

Specification of function: config_sysconfig_lcg

The function 'config_sysconfig_lcg' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.
SITE_NAME :: Your GIIS.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_sysconfig_lcg

The code is reproduced also in 24.4..

Set-up updating of CRLs

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_crl'.

Cron script is installed to fetch new versions of CRLs four times a day. The time when the script is run is randomized in order to distribute the load on CRL servers. If the configuration is run as root, the cron entry is installed in /etc/cron.d/edg-fetch-crl, otherwise it is installed as a user cron entry.

CRLs are also updated immediately by running the update script (<INSTALL_ROOT>/edg/etc/cron/edg-fetch-crl-cron).

Logrotate script is installed as /etc/logrotate.d/edg-fetch-crl to prevent the logs from growing indefinitely.

Specification of function: config_crl

The function 'config_crl' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_crl

The code is reproduced also in 24.5..

Set-up RFIO

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_rfio'.

rfiod is configured on SE_classic nodes by adding the appropriate ports (5001 TCP and UDP) to /etc/services and restarting the daemon.

For SE_dpm nodes, rfiod is configured by config_DPM_rfio so no configuration is done here.

All other nodes don't run rfiod. However, rfiod might still be installed from CASTOR-client RPM. If this is the case, we make sure it's stopped and disabled.

Specification of function: config_rfio

The function 'config_rfio' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_rfio

The code is reproduced also in 24.6..

Set-up Host Certificates

Author(s): Retico,Antonio
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_host_certs'.

The SE_dpm_oracle node requires the host certificate/key files to be put in place before you start the installation.

Contact your national Certification Authority (CA) to understand how to obtain a host certificate if you do not have one already.

Instruction to obtain a CA list can be found in

http://markusw.home.cern.ch/markusw/lcg2CAlist.html

From the CA list so obtained you should choose a CA close to you.

Once you have obtained a valid certificate, i.e. a file

hostcert.pem

containing the machine public key and a file

hostkey.pem

containing the machine private key, make sure to place the two files into the directory

/etc/grid-security

with the following permissions

> chmod 400 /etc/grid-security/hostkey.pem

> chmod 644 /etc/grid-security/hostcert.pem

It is IMPORTANT that permissions be set as shown, as otherwise certification errors will occur.

If the certificates don't exist, the function exits with an error message and the calling process is interrupted.

Specification of function: config_host_certs

The function 'config_host_certs' needs the following variables to be set in the configuration file:

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_host_certs

The code is reproduced also in 24.7..

Create pool accounts

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_users'.

config_users creates pool accounts for grid users defined in users.conf. Each line in this file describes one user:

UID:LOGIN:GID:GROUP:VO:SGM_FLAG:

First, the format of the users.conf file is checked (VO and SGM fields were added recently).

Groups are then created for the supported VOs (listed in <VOS> variable) using groupadd.

For each of the lines in users.conf, a user account is created (with useradd) if that user's VO is supported.

Finally, grid users are denied access to cron and at by adding their usernames to /etc/at.deny and /etc/cron.deny.

Specification of function: config_users

The function 'config_users' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.
USERS_CONF :: Path to the file containing a list of Linux users (pool accounts) to be created. This file should be created by the Site Administrator, which contains a plain list of the users and IDs. An example of this configuration file is given in /opt/lcg/yaim/examples/users.conf.
VOS :: List of supported VOs.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_users

The code is reproduced also in 24.8..

Create EDG users

Author(s): Retico,Antonio
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_edgusers'.

Many of the services running on LCG service nodes are owned by the user edguser. The user edguser belongs to the group edguser and it has got a home directory in /home.

The user edginfo is required on all the nodes publishing information on the Information System. The user belongs to the group edginfo and it has got a home directory in /home.

No special requirements exists for the ID of the above mentioned users and groups.

The function creates bothedguser and edginfo groups and users.

group edguser: the group is created with group ID 995.
user edguser: the user is created with group ID 995 and its home is /home/edguser.
group edginfo: the group is created with group ID 999.
user edginfo: the user is created with group ID 999 and its home is /home/edguser.

Specification of function: config_edgusers

The function 'config_edgusers' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.
USERS_CONF :: Path to the file containing a list of Linux users (pool accounts) to be created. This file should be created by the Site Administrator, which contains a plain list of the users and IDs. An example of this configuration file is given in /opt/lcg/yaim/examples/users.conf.
VOS :: List of supported VOs.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_edgusers

The code is reproduced also in 24.9..

Set-up pool account mappings

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_mkgridmap'.

Format of the users.conf file is checked first. This file should have six colon separated fields. Using this file, /etc/grid-security/gridmapdir pool directory is created and initialized with pool accounts.

Next, configuration for edg-mkgridmap is generated in <INSTALL_ROOT>/edg/etc/edg-mkgridmap.conf. edg-mkgridmap generates /etc/grid-security/grid-mapfile using VO membership information in VOMS and/or LDAP. The following lines are generated for each of the supported VOs:

group <VO_<vo>_SERVER>/Role=lcgadmin sgmuser
group <VO_<vo>_SERVER>/<VO_<vo>_VOMS_EXTRA_MAPS>
group <VO_<vo>_SERVER><VO_<vo>_VOMS_POOL_PATH> .user_prefix

group <VO_<vo>_SGM> sgmuser
group <VO_<vo>_USERS> .user_prefix

where sgmuser is SGM for the <vo> and user_prefix is the prefix for <vo> pool accounts (both values are inferred from users.conf). Multiple VOMS servers and extra maps can be defined.

Authentication URLs and site specific mappings are appended to the end of the file:

auth <GRIDMAP_AUTH>

gmf_local <INSTALL_ROOT>/edg/etc/grid-mapfile-local

If authentication URLs are not defined in <GRIDMAP_AUTH>, ldap://lcg-registrar.cern.ch/ou=users,o=registrar,dc=lcg,dc=org is used.

Site specific grid user mappings can be defined in <INSTALL_ROOT>/edg/etc/grid-mapfile-local. Contents of this file are included verbatim in the output of edg-mkgridmap.

<INSTALL_ROOT>/edg/etc/lcmaps/gridmapfile is generated with the following contents for each supported VO:

/VO=<vo>/GROUP=/<vo>/ROLE=lcgadmin sgmuser
/VO=<vo>/GROUP=/<vo> .user_prefix

This file defines local account mappings for VOMS enabled proxy certificates.

<INSTALL_ROOT>/edg/etc/lcmaps/groupmapfile is generated with the following contents for each supported VO:

/VO=<vo>/GROUP=/<vo>/ROLE=lcgadmin vo_group
/VO=<vo>/GROUP=/<vo> vo_group

This file defines local group mappings for VOMS enabled proxy certificates.

After the configuration is finished, edg-mkgridmap is run with the new configuration to generate the /etc/grid-security/grid-mapfile. Cron job for regenerating grid-mapfile is installed to run four times a day.

A cron job for expiring gridmapdir pool accounts is installed to run once a day on all nodes except nodes running dpm. This is a temporary fix to avoid users losing access to their files after the mapping expires and they are mapped to a different local user. By default, pool accounts expire if they are not used for more than 2 days, except on RB where they are expired after 10 days.

Specification of function: config_mkgridmap

The function 'config_mkgridmap' needs the following variables to be set in the configuration file:

CRON_DIR :

Yaim writes all cron jobs to this directory. Change it if you want to turn off Yaim's management of cron.

GRIDMAP_AUTH :

List of ldap servers in edg-mkgridmap.conf which authenticate users.

GROUPS_CONF :

Path to the groups.conf file which contains information on mapping VOMS groups and roles to local groups. An example of this configuration file is given in /opt/lcg/yaim/examples/groups.conf.

INSTALL_ROOT :

Installation root - change if using the re-locatable distribution.

USERS_CONF :

VOS :

List of supported VOs. For each item listed in the VOS variable you need to create a set of new variables as follows:

VO_VO-NAME_SGM :: ldap directory with VO software managers list. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_USERS :: ldap directory with VO users list. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_VOMS_POOL_PATH :: If necessary, append this to the VOMS_SERVER URL for the pool account list .
VO_VO-NAME_VOMS_SERVERS :: A list of VOMS servers for the VO.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_mkgridmap

The code is reproduced also in 24.10..

Set-up Java location

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_java'.

Since Java is not included in the LCG distribution, Java location needs to be configured with yaim.

If <JAVA_LOCATION> is not defined in site-info.def, it is determined from installed Java RPMs (if available).

In relocatable distribution, JAVA_HOME environment variable is defined in <INSTALL_ROOT>/etc/profile.d/grid_env.sh and <INSTALL_ROOT>/etc/profile.d/grid_env.csh.

Otherwise, JAVA_HOME is defined in /etc/java/java.conf and /etc/java.conf and Java binaries added to PATH in <INSTALL_ROOT>/edg/etc/profile.d/j2.sh and <INSTALL_ROOT>/edg/etc/profile.d/j2.csh.

Specification of function: config_java

The function 'config_java' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.
JAVA_LOCATION :: Path to Java VM installation. It can be used in order to run a different version of java installed locally.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_java

The code is reproduced also in 24.11..

Set-up R-GMA client

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_rgma_client'.

R-GMA client configuration is generated in <INSTALL_ROOT>/glite/etc/rgma/rgma.conf by running:

<INSTALL_ROOT>/glite/share/rgma/scripts/rgma-setup.py --secure=no --server=<MON_HOST> --registry=<REG_HOST> --schema=<REG_HOST>

<INSTALL_ROOT>/edg/etc/profile.d/edg-rgma-env.sh and <INSTALL_ROOT>/edg/etc/profile.d/edg-rgma-env.csh with the following functionality:

RGME_HOME is set to <INSTALL_ROOT>/glite
APEL_HOME is set to <INSTALL_ROOT>/glite
<INSTALL_ROOT>/glite/lib/python is added to PYTHONPATH
<INSTALL_ROOT>/glite/lib is added to LD_LIBRARY_PATH.

These files are sourced into the users environment from <INSTALL_ROOT>/etc/profile.d/z_edg_profile.sh and <INSTALL_ROOT>/etc/profile.d/z_edg_profile.csh.

Specification of function: config_rgma_client

The function 'config_rgma_client' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.
MON_HOST :: MON Box Hostname.
REG_HOST :: RGMA Registry hostname.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_rgma_client

The code is also reproduced in 24.12..

Set-up Generic Information Provider

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_gip'.

Generic Information Provider (GIP) is configured through <INSTALL_ROOT>/lcg/var/gip/lcg-info-generic.conf. The start of this file is common for all types of nodes:

ldif_file=<INSTALL_ROOT>/lcg/var/gip/lcg-info-static.ldif
generic_script=<INSTALL_ROOT>/lcg/libexec/lcg-info-generic
wrapper_script=<INSTALL_ROOT>/lcg/libexec/lcg-info-wrapper
temp_path=<INSTALL_ROOT>/lcg/var/gip/tmp
template=<INSTALL_ROOT>/lcg/etc/GlueSite.template
template=<INSTALL_ROOT>/lcg/etc/GlueCE.template
template=<INSTALL_ROOT>/lcg/etc/GlueCESEBind.template
template=<INSTALL_ROOT>/lcg/etc/GlueSE.template
template=<INSTALL_ROOT>/lcg/etc/GlueService.template

# Common for all
GlueInformationServiceURL: ldap://<hostname>:2135/mds-vo-name=local,o=grid

<hostname> is determined by running hostname -f.

For CE the following is added:

dn: GlueSiteUniqueID=<SITE_NAME>,mds-vo-name=local,o=grid
GlueSiteName: <SITE_NAME>
GlueSiteDescription: LCG Site
GlueSiteUserSupportContact: mailto: <SITE_EMAIL>
GlueSiteSysAdminContact: mailto: <SITE_EMAIL>
GlueSiteSecurityContact: mailto: <SITE_EMAIL>
GlueSiteLocation: <SITE_LOC>
GlueSiteLatitude: <SITE_LAT>
GlueSiteLongitude: <SITE_LONG>
GlueSiteWeb: <SITE_WEB>
GlueSiteOtherInfo: <SITE_TIER>
GlueSiteOtherInfo: <SITE_SUPPORT_SITE>
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueForeignKey: GlueClusterUniqueID=<CE_HOST>
GlueForeignKey: GlueSEUniqueID=<SE_HOST>

dynamic_script=<INSTALL_ROOT>/lcg/libexec/lcg-info-dynamic-ce
dynamic_script=<INSTALL_ROOT>/lcg/libexec/lcg-info-dynamic-software <INSTALL_ROOT>/lcg/var/gip/lcg-info-generic.conf 

# CE Information Provider
GlueCEHostingCluster: <CE_HOST>
GlueCEInfoGatekeeperPort: 2119
GlueCEInfoHostName: <CE_HOST>
GlueCEInfoLRMSType: <CE_BATCH_SYS>
GlueCEInfoLRMSVersion: not defined
GlueCEInfoTotalCPUs: 0
GlueCEPolicyMaxCPUTime: 0
GlueCEPolicyMaxRunningJobs: 0
GlueCEPolicyMaxTotalJobs: 0
GlueCEPolicyMaxWallClockTime: 0
GlueCEPolicyPriority: 1
GlueCEStateEstimatedResponseTime: 0
GlueCEStateFreeCPUs: 0
GlueCEStateRunningJobs: 0
GlueCEStateStatus: Production
GlueCEStateTotalJobs: 0
GlueCEStateWaitingJobs: 0
GlueCEStateWorstResponseTime: 0
GlueHostApplicationSoftwareRunTimeEnvironment: <ce_runtimeenv>
GlueHostArchitectureSMPSize: <CE_SMPSIZE>
GlueHostBenchmarkSF00: <CE_SF00>
GlueHostBenchmarkSI00: <CE_SI00>
GlueHostMainMemoryRAMSize: <CE_MINPHYSMEM>
GlueHostMainMemoryVirtualSize: <CE_MINVIRTMEM>
GlueHostNetworkAdapterInboundIP: <CE_INBOUNDIP>
GlueHostNetworkAdapterOutboundIP: <CE_OUTBOUNDIP>
GlueHostOperatingSystemName: <CE_OS>
GlueHostOperatingSystemRelease: <CE_OS_RELEASE>
GlueHostOperatingSystemVersion: 3
GlueHostProcessorClockSpeed: <CE_CPU_SPEED>
GlueHostProcessorModel: <CE_CPU_MODEL>
GlueHostProcessorVendor: <CE_CPU_VENDOR>
GlueSubClusterPhysicalCPUs: 0
GlueSubClusterLogicalCPUs: 0
GlueSubClusterTmpDir: /tmp
GlueSubClusterWNTmpDir: /tmp
GlueCEInfoJobManager: <JOB_MANAGER>
GlueCEStateFreeJobSlots: 0
GlueCEPolicyAssignedJobSlots: 0
GlueCESEBindMountInfo: none
GlueCESEBindWeight: 0

dn: GlueClusterUniqueID=<CE_HOST>, mds-vo-name=local,o=grid
GlueClusterName: <CE_HOST}
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueClusterService: <CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>
GlueForeignKey: GlueCEUniqueID=<CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>

dn: GlueSubClusterUniqueID=<CE_HOST>, GlueClusterUniqueID=<CE_HOST>, mds-vo-name=local,o=grid
GlueChunkKey: GlueClusterUniqueID=<CE_HOST>
GlueSubClusterName: <CE_HOST>

dn: GlueCEUniqueID=<CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>, mds-vo-name=local,o=grid
GlueCEName: <queue>
GlueForeignKey: GlueClusterUniqueID=<CE_HOST>
GlueCEInfoContactString: <CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>
GlueCEAccessControlBaseRule: VO:<vo>

dn: GlueVOViewLocalID=<vo>,GlueCEUniqueID=<CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>,mds-vo-name=local,o=grid
GlueCEAccessControlBaseRule: VO:<vo>
GlueCEInfoDefaultSE: <VO_<vo>_DEFAULT_SE>
GlueCEInfoApplicationDir: <VO_<vo>_SW_DIR>
GlueCEInfoDataDir: <VO_<vo>_STORAGE_DIR>
GlueChunkKey: GlueCEUniqueID=<CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>

dn: GlueCESEBindGroupCEUniqueID=<CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>, mds-vo-name=local,o=grid
GlueCESEBindGroupSEUniqueID: <se_list>

dn: GlueCESEBindSEUniqueID=<se>, GlueCESEBindGroupCEUniqueID=<CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>, mds-vo-name=local,o=grid
GlueCESEBindCEAccesspoint: <accesspoint>
GlueCESEBindCEUniqueID: <CE_HOST>:2119/jobmanager-<JOB_MANAGER>-<queue>

where <accesspoint> is:

<DPMDATA> for DPM SE
/storage for dCache
<CLASSIC_STORAGE_DIR> for SE classic.

Some lines can be generated multiple times for different <vo>s, <queue>s, <se>s etc.

For each of the supported VOs, a directory is created in <INSTALL_ROOT>/edg/var/info/<vo>. These are used by SGMs to publish information on experiment software installed on the cluster.

For the nodes running GridICE server (usually SE) the following is added:

dn: GlueServiceUniqueID=<GRIDICE_SERVER_HOST>:2136,Mds-vo-name=local,o=grid
GlueServiceName: <SITE_NAME>-gridice
GlueServiceType: gridice
GlueServiceVersion: 1.1.0
GlueServiceEndpoint: ldap://<GRIDICE_SERVER_HOST>:2136/mds-vo-name=local,o=grid
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceStartTime: 2002-10-09T19:00:00Z
GlueServiceOwner: LCG
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueServiceAccessControlRule:<vo>

For PX nodes the following is added:

dn: GlueServiceUniqueID=<PX_HOST>:7512,Mds-vo-name=local,o=grid
GlueServiceName: <SITE_NAME>-myproxy
GlueServiceType: myproxy
GlueServiceVersion: 1.1.0
GlueServiceEndpoint: <PX_HOST>:7512
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceStartTime: 2002-10-09T19:00:00Z
GlueServiceOwner: LCG
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueServiceAccessControlRule: <grid_trusted_broker>

For nodes running RB the following is added:

dn: GlueServiceUniqueID=<RB_HOST>:7772,Mds-vo-name=local,o=grid
GlueServiceName: <SITE_NAME>-rb
GlueServiceType: ResourceBroker
GlueServiceVersion: 1.2.0
GlueServiceEndpoint: <RB_HOST>:7772
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceStartTime: 2002-10-09T19:00:00Z
GlueServiceOwner: LCG
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueServiceAccessControlRule: <vo>

dn: GlueServiceDataKey=HeldJobs,GlueServiceUniqueID=gram://<RB_HOST>:7772,Mds-vo-name=local,o=grid
GlueServiceDataKey: HeldJobs
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://<RB_HOST>:7772

dn: GlueServiceDataKey=IdleJobs,GlueServiceUniqueID=gram://<RB_HOST>:7772,Mds-vo-name=local,o=grid
GlueServiceDataKey: IdleJobs
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://<RB_HOST>:7772

dn: GlueServiceDataKey=JobController,GlueServiceUniqueID=gram://<RB_HOST>:7772,Mds-vo-name=local,o=grid
GlueServiceDataKey: JobController
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://<RB_HOST>:7772

dn: GlueServiceDataKey=Jobs,GlueServiceUniqueID=gram://<RB_HOST>:7772,Mds-vo-name=local,o=grid
GlueServiceDataKey: Jobs
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://<RB_HOST>:7772

dn: GlueServiceDataKey=LogMonitor,GlueServiceUniqueID=gram://<RB_HOST>:7772,Mds-vo-name=local,o=grid
GlueServiceDataKey: LogMonitor
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://<RB_HOST>:7772

dn: GlueServiceDataKey=RunningJobs,GlueServiceUniqueID=gram://<RB_HOST>:7772,Mds-vo-name=local,o=grid
GlueServiceDataKey: RunningJobs
GlueServiceDataValue: 14
GlueChunkKey: GlueServiceUniqueID=gram://<RB_HOST>:7772

dn: GlueServiceDataKey=WorkloadManager,GlueServiceUniqueID=gram://<RB_HOST>:7772,Mds-vo-name=local,o=grid
GlueServiceDataKey: WorkloadManager
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://<RB_HOST>:7772

For central LFC the following is added:

dn: GlueServiceUniqueID=http://<LFC_HOST>:8085/,mds-vo-name=local,o=grid
GlueServiceName: <SITE_NAME>-lfc-dli
GlueServiceType: data-location-interface
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: http://<LFC_HOST>:8085/
GlueServiceURI: http://<LFC_HOST}:8085/
GlueServiceAccessPointURL: http://<LFC_HOST>:8085/
GlueServiceStatus: running
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueServiceOwner: <vo>
GlueServiceAccessControlRule: <vo>

dn: GlueServiceUniqueID=<LFC_HOST>,mds-vo-name=local,o=grid
GlueServiceName: <SITE_NAME>-lfc
GlueServiceType: lcg-file-catalog
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: <LFC_HOST>
GlueServiceURI: <LFC_HOST>
GlueServiceAccessPointURL: <LFC_HOST>
GlueServiceStatus: running
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueServiceOwner: <vo>
GlueServiceAccessControlRule: <vo>

For local LFC the following is added:

dn: GlueServiceUniqueID=<LFC_HOST>,mds-vo-name=local,o=grid
GlueServiceName: <SITE_NAME>-lfc
GlueServiceType: lcg-local-file-catalog
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: <LFC_HOST>
GlueServiceURI: <LFC_HOST>
GlueServiceAccessPointURL: <LFC_HOST>
GlueServiceStatus: running
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueServiceOwner: <vo>
GlueServiceAccessControlRule: <vo>

For dcache and dpm nodes the following is added:

dn: GlueServiceUniqueID=httpg://<SE_HOST>:8443/srm/managerv1,Mds-Vo-name=local,o=grid
GlueServiceAccessPointURL: httpg://<SE_HOST>:8443/srm/managerv1
GlueServiceEndpoint: httpg://<SE_HOST>:8443/srm/managerv1
GlueServiceType: srm_v1
GlueServiceURI: httpg://<SE_HOST>:8443/srm/managerv1
GlueServicePrimaryOwnerName: LCG
GlueServicePrimaryOwnerContact: mailto:<SITE_EMAIL>
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueServiceVersion: 1.0.0
GlueServiceAccessControlRule: <vo>
GlueServiceInformationServiceURL: MDS2GRIS:ldap://<BDII_HOST>:2170/mds-voname=local,mds-vo-name=<SITE_NAME>,mds-vo-name=local,o=grid
GlueServiceStatus: running

For all types of SE the following is added:

dynamic_script=<INSTALL_ROOT>/lcg/libexec/lcg-info-dynamic-se

GlueSEType: <se_type>
GlueSEPort: 2811
GlueSESizeTotal: 0
GlueSESizeFree: 0
GlueSEArchitecture: <se_type>
GlueSAType: permanent
GlueSAPolicyFileLifeTime: permanent
GlueSAPolicyMaxFileSize: 10000
GlueSAPolicyMinFileSize: 1
GlueSAPolicyMaxData: 100
GlueSAPolicyMaxNumFiles: 10
GlueSAPolicyMaxPinDuration: 10
GlueSAPolicyQuota: 0
GlueSAStateAvailableSpace: 1
GlueSAStateUsedSpace: 1

dn: GlueSEUniqueID=<SE_HOST>,mds-vo-name=local,o=grid
GlueSEName: <SITE_NAME>:<se_type>
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>

dn: GlueSEAccessProtocolLocalID=gsiftp, GlueSEUniqueID=<SE_HOST>,Mds-Vo-name=local,o=grid
GlueSEAccessProtocolType: gsiftp
GlueSEAccessProtocolPort: 2811
GlueSEAccessProtocolVersion: 1.0.0
GlueSEAccessProtocolSupportedSecurity: GSI
GlueChunkKey: GlueSEUniqueID=<SE_HOST>

dn: GlueSEAccessProtocolLocalID=rfio, GlueSEUniqueID=<SE_HOST>,Mds-Vo-name=local,o=grid
GlueSEAccessProtocolType: rfio
GlueSEAccessProtocolPort: 5001
GlueSEAccessProtocolVersion: 1.0.0
GlueSEAccessProtocolSupportedSecurity: RFIO
GlueChunkKey: GlueSEUniqueID=<SE_HOST>

where <se_type> is srm_v1 for DPM and dCache and disk otherwise.

For SE_dpm the following is added:

dn: GlueSALocalID=<vo>,GlueSEUniqueID=<SE_HOST>,Mds-Vo-name=local,o=grid
GlueSARoot: <vo>:/dpm/<domain>/home/<vo>
GlueSAPath: <vo>:/dpm/<domain>/home/<vo>
GlueSAAccessControlBaseRule: <vo>
GlueChunkKey: GlueSEUniqueID=<SE_HOST>

For SE_dcache the following is added:

dn: GlueSALocalID=<vo>,GlueSEUniqueID=<SE_HOST>,Mds-Vo-name=local,o=grid
GlueSARoot: <vo>:/pnfs/<domain>/home/<vo>
GlueSAPath: <vo>:/pnfs/<domain>/home/<vo>
GlueSAAccessControlBaseRule: <vo>
GlueChunkKey: GlueSEUniqueID=<SE_HOST>

For other types of SE the following is used:

dn: GlueSALocalID=<vo>,GlueSEUniqueID=<SE_HOST>,Mds-Vo-name=local,o=grid
GlueSARoot: <vo>:<vo>
GlueSAPath: <VO_<vo>_STORAGE_DIR>
GlueSAAccessControlBaseRule: <vo>
GlueChunkKey: GlueSEUniqueID=<SE_HOST>

For VOBOX the following is added:

dn: GlueServiceUniqueID=gsissh://<VOBOX_HOST>:<VOBOX_PORT>,Mds-vo-name=local,o=grid
GlueServiceAccessPointURL: gsissh://<VOBOX_HOST>:<VOBOX_PORT>
GlueServiceName: <SITE_NAME>-vobox
GlueServiceType: VOBOX
GlueServiceEndpoint: gsissh://<VOBOX_HOST>:<VOBOX_PORT>
GlueServicePrimaryOwnerName: LCG
GlueServicePrimaryOwnerContact: <SITE_EMAIL>
GlueForeignKey: GlueSiteUniqueID=<SITE_NAME>
GlueServiceVersion: 1.0.0
GlueServiceInformationServiceURL: ldap://<VOBOX_HOST>:2135/mds-vo-name=local,o=grid
GlueServiceStatus: running
GlueServiceAccessControlRule: <vo>

Configuration script is run:

<INSTALL_ROOT>/lcg/sbin/lcg-info-generic-config <INSTALL_ROOT>/lcg/var/gip/lcg-info-generic.conf

Configuration script generates a ldif file (<INSTALL_ROOT>/lcg/var/gip/lcg-info-static.ldif) by merging templates from <INSTALL_ROOT>/lcg/etc/ and data from <INSTALL_ROOT>/lcg/var/gip/lcg-info-generic.conf. Wrapper script is also created in <INSTALL_ROOT>/lcg/libexec/lcg-info-wrapper.

<INSTALL_ROOT>/globus/libexec/edg.info is created:

#!/bin/bash
#
# info-globus-ldif.sh
#
#Configures information providers for MDS
#
cat << EOF

dn: Mds-Vo-name=local,o=grid
objectclass: GlobusTop
objectclass: GlobusActiveObject
objectclass: GlobusActiveSearch
type: exec
path: <INSTALL_ROOT>/lcg/libexec
base: lcg-info-wrapper
args:
cachetime: 60
timelimit: 20
sizelimit: 250

EOF

<INSTALL_ROOT>/globus/libexec/edg.info is created:

#!/bin/bash

cat <<EOF
<INSTALL_ROOT>/globus/etc/openldap/schema/core.schema
<INSTALL_ROOT>/glue/schema/ldap/Glue-CORE.schema
<INSTALL_ROOT>/glue/schema/ldap/Glue-CE.schema
<INSTALL_ROOT>/glue/schema/ldap/Glue-CESEBind.schema
<INSTALL_ROOT>/glue/schema/ldap/Glue-SE.schema
EOF

These two scripts are used to generate slapd configuration for Globus MDS.

<INSTALL_ROOT>/lcg/libexec/lcg-info-dynamic-ce is generated to call the information provider appropriate for the LRMS. For Torque the file has these contents:

#!/bin/sh
<INSTALL_ROOT>/lcg/libexec/lcg-info-dynamic-pbs <INSTALL_ROOT>/lcg/var/gip/lcg-info-generic.conf <TORQUE_SERVER>

R-GMA GIN periodically queries MDS and inserts the data into R-GMA. GIN is configured on all nodes except UI and WN by copying host certificate to <INSTALL_ROOT>/glite/var/rgma/.certs and updating the configuration file appropriately (<INSTALL_ROOT>/glite/etc/rgma/ClientAuthentication.props). Finally, GIN configuration script (<INSTALL_ROOT>/glite/bin/rgma-gin-config) is run to configure the mapping between Glue schema in MDS and Glue tables in R-GMA. rgma-gin service is restarted and configured to start on boot.

Specification of function: config_gip

The function 'config_gip' needs the following variables to be set in the configuration file:

BDII_HOST :

BDII Hostname.

CE_BATCH_SYS :

Implementation of site batch system. Available values are ``torque'', ``lsf'', ``pbs'', ``condor'' etc.

CE_CPU_MODEL :

Model of the CPU used by the WN (WN specification). This parameter is a string whose domain is not defined yet in the GLUE Schema. The value used for Pentium III is "PIII".

CE_CPU_SPEED :

Clock frequency in Mhz (WN specification).

CE_CPU_VENDOR :

Vendor of the CPU. used by the WN (WN specification). This parameter is a string whose domain is not defined yet in the GLUE Schema. The value used for Intel is ``intel''.

CE_HOST :

Computing Element Hostname.

CE_INBOUNDIP :

TRUE if inbound connectivity is enabled at your site, FALSE otherwise (WN specification).

CE_MINPHYSMEM :

RAM size in kblocks (WN specification).

CE_MINVIRTMEM :

Virtual Memory size in kblocks (WN specification).

CE_OS :

Operating System name (WN specification).

CE_OS_RELEASE :

Operating System release (WN specification).

CE_OUTBOUNDIP :

TRUE if outbound connectivity is enabled at your site, FALSE otherwise (WN specification).

CE_RUNTIMEENV :

CE_SF00 :

Performance index of your fabric in SpecFloat 2000 (WN specification). For some examples of Spec values see http://www.specbench.org/osg/cpu2000/results/cint2000.html.

CE_SI00 :

Performance index of your fabric in SpecInt 2000 (WN specification). For some examples of Spec values see http://www.specbench.org/osg/cpu2000/results/cint2000.html.

CE_SMPSIZE :

Number of cpus in an SMP box (WN specification).

CLASSIC_HOST :

The name of your SE_classic host.

CLASSIC_STORAGE_DIR :

The root storage directory on CLASSIC_HOST.

DCACHE_ADMIN :

Host name of the server node which manages the pool of nodes.

DPMDATA :

Directory where the data is stored (absolute path, e.g./storage).

DPM_HOST :

Host name of the DPM host, used also as a default DPM for the lcg-stdout-mon .

GRIDICE_SERVER_HOST :

GridIce server host name (usually run on the MON node).

GRID_TRUSTED_BROKERS :

List of the DNs of the Resource Brokers host certificates which are trusted by the Proxy node (ex: /O=Grid/O=CERN/OU=cern.ch/CN=host/testbed013.cern.ch).

INSTALL_ROOT :

Installation root - change if using the re-locatable distribution.

JOB_MANAGER :

The name of the job manager used by the gatekeeper.

LFC_CENTRAL :

A list of VOs for which the LFC should be configured as a central catalogue.

LFC_HOST :

Set this if you are building an LFC_HOST, not if you're just using clients.

LFC_LOCAL :

VO_VO-NAME_QUEUES :: The queues that the VO can use on the CE.
VO_VO-NAME_SE :: Default SE used by the VO. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_STORAGE_DIR :: Mount point on the Storage Element for the VO. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_SW_DIR :: Area on the WN for the installation of the experiment software. If on the WNs a predefined shared area has been mounted where VO managers can pre-install software, then these variable should point to this area. If instead there is not a shared area and each job must install the software, then this variables should contain a dot ( . ).Anyway the mounting of shared areas, as well as the local installation of VO software is not managed by yaim and should be handled locally by Site Administrators. WARNING: VO-NAME must be in capital cases.

PX_HOST :

PX hostname.

QUEUES :

The name of the queues for the CE. These are by default set as the VO names.

RB_HOST :

Resource Broker Hostname.

SE_LIST :

A list of hostnames of the SEs available at your site.

SITE_EMAIL :

The e-mail address as published by the information system.

SITE_LAT :

Site latitude.

SITE_LOC :

"City, Country".

SITE_LONG :

Site longitude.

SITE_NAME :

Your GIIS.

SITE_SUPPORT_SITE :

Support entry point ; Unique Id for the site in the GOC DB and information system.

SITE_TIER :

Site tier.

SITE_WEB :

Site site.

TORQUE_SERVER :

Set this if your torque server is on a different host from the CE. It is ingored for other batch systems.

VOBOX_HOST :

VOBOX hostname.

VOBOX_PORT :

The port the VOBOX gsisshd listens on.

VOS :

List of supported VOs.

VO_SW_DIR :

Directory for installation of experiment software.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_gip

The code is also reproduced in 24.13..

Set-up Globus daemons

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_globus'.

The Globus configuration file /etc/globus.conf is parsed by Globus daemon startup scripts to locate the Globus root directory and other global/daemon specific properties. The contents of the configuration file depend on the type of the node. The following table contains information on daemon to node mapping:

node/daemon MDS GridFTP Gatekeeper

CE yes yes yes

VOBOX yes yes yes

SE_* yes yes no

SE_dpm yes no no

PX yes no no

RB yes no no

LFC yes no no

GridICE yes no no

Note that SE_dpm does not run standard GridFTP server, but a specialized DPM version.

The configuration file is divided into sections:

common: Defines Globus installation directory, host certificates, location of gridmap file etc.
mds: Defines information providers.
gridftp: Defines the location of the GridFTP log file.
gatekeeper: Defines jobmanagers and their parameters.

Logrotate scripts globus-gatekeeper and gridftp are installed in /etc/logrotate.d/.

Globus initialization script (<INSTALL_DIR>/globus/sbin/globus-initialization.sh) is run next.

Finally, the appropriate daemons (globus-mds, globus-gatekeeper, globus-gridftp, lcg-mon-gridftp) are started (and configured to start on boot).

Specification of function: config_globus

The function 'config_globus' needs the following variables to be set in the configuration file:

CE_HOST :: Computing Element Hostname.
GRIDICE_SERVER_HOST :: GridIce server host name (usually run on the MON node).
INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.
JOB_MANAGER :: The name of the job manager used by the gatekeeper.
PX_HOST :: PX hostname.
RB_HOST :: Resource Broker Hostname.
SITE_NAME :: Your GIIS.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_globus

The code is reproduced also in 24.14..

Set-up LCG environment variables

Author(s): Retico,Antonio
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_lcgenv'.

The LCG middleware needs some environment variables to be set up at boot time. The variable should be available both in 'bash-like' shells and in 'csh-like' shells.

This can be obtained in different ways:

The simplest way, if you have 'root' permissions, is to put a shell script for each of the supported shell 'families' in the directory /etc/profile.d. The script will be automatically sourced at start up.

If instead you are not a superuser and you are doing the installation in a private directory (e.g. you are installing a Re-locatable Distribution of a Worker Node or a User Interface in the <INSTALL_ROOT> directory), you could create the scripts in the directory <INSTALL_ROOT>/etc/profile.d, in order to have the variables automatically set up by LCG tools.

The list of the environment variables to be set up follows:

LCG_GFAL_INFOSYS:: Hostname of the BDII node.
MYPROXY_SERVER:: Hostname of the Proxy server.
PATH:: Add to the PATH variable the path /opt/d-cache-client/bin
LD_LIBRARY_PATH:: Add to the LD_LIBRARY_PATH variable the path /opt/d-cache-client/dcap
SRM_PATH:: Installation directory of the srm client. The default value for this variable is /opt/d-cache-client/srm
VO_<VO-NAME>_SW_DIR:: For each virtual organization <VO-NAME> An environment variable VO_<VO-NAME>_SW_DIR is needed. This variable points to the installation directory of the VO software.
VO_<VO-NAME>_DEFAULT_SE:: For each virtual organization <VO-NAME> An environment variable VO_<VO-NAME>_DEFAULT_SE is needed. This variable points to the Default Storage Element for that VO.

The examples given hereafter refer to the simple configuration method described above. In the following description we will refer to the two possible locations as to the <LCG_ENV_LOC>.
So, according to the cases above described, either

<LCG_ENV_LOC>=/etc/profile.d

<LCG_ENV_LOC>=<INSTALL_ROOT>/etc/profile.d

Examples:

Example of file <LCG_ENV_LOC>/lcgenv.sh:

#!/bin/sh
export LCG_GFAL_INFOSYS=lxb1769.cern.ch:2170
export MYPROXY_SERVER=lxb1774.cern.ch
export PATH="${PATH}:/opt/d-cache-client/bin"
export LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:/opt/d-cache-client/dcap
export SRM_PATH=/opt/d-cache-client/srm
export VO_ATLAS_SW_DIR=lxb1780.cern.ch
export VO_ATLAS_DEFAULT_SE=lxb1780.cern.ch
export VO_ALICE_SW_DIR=lxb1780.cern.ch
export VO_ALICE_DEFAULT_SE=lxb1780.cern.ch
export VO_LHCB_SW_DIR=lxb1780.cern.ch
export VO_LHCB_DEFAULT_SE=lxb1780.cern.ch
export VO_CMS_SW_DIR=lxb1780.cern.ch
export VO_CMS_DEFAULT_SE=lxb1780.cern.ch
export VO_DTEAM_SW_DIR=lxb1780.cern.ch
export VO_DTEAM_DEFAULT_SE=lxb1780.cern.ch

Example of file <LCG_ENV_LOC>/lcgenv.csh:

#!/bin/csh
setenv LCG_GFAL_INFOSYS lxb1769.cern.ch:2170
setenv MYPROXY_SERVER lxb1774.cern.ch
setenv PATH "${PATH}:/opt/d-cache-client/bin"
setenv LD_LIBRARY_PATH ${LD_LIBRARY_PATH}:/opt/d-cache-client/dcap
setenv SRM_PATH /opt/d-cache-client/srm
setenv VO_ATLAS_SW_DIR lxb1780.cern.ch
setenv VO_ATLAS_DEFAULT_SE lxb1780.cern.ch
setenv VO_ALICE_SW_DIR lxb1780.cern.ch
setenv VO_ALICE_DEFAULT_SE lxb1780.cern.ch
setenv VO_LHCB_SW_DIR lxb1780.cern.ch
setenv VO_LHCB_DEFAULT_SE lxb1780.cern.ch
setenv VO_CMS_SW_DIR lxb1780.cern.ch
setenv VO_CMS_DEFAULT_SE lxb1780.cern.ch
setenv VO_DTEAM_SW_DIR lxb1780.cern.ch
setenv VO_DTEAM_DEFAULT_SE lxb1780.cern.ch

WARNING: The two scripts must be executable by all users.

> chmod a+x ${LCG_ENV_LOC}/lcgenv.csh
> chmod a+x ${LCG_ENV_LOC}/lcgenv.sh

Specification of function: config_lcgenv

The function 'config_lcgenv' needs the following variables to be set in the configuration file:

BDII_HOST :

BDII Hostname.

CE_HOST :

Computing Element Hostname.

DPM_HOST :

Host name of the DPM host, used also as a default DPM for the lcg-stdout-mon .

EDG_WL_SCRATCH :

Set this if you want jobs to use a particular scratch area.

EDG_WL_SCRATCH :

Set this if you want jobs to use a particular scratch area.

GLOBUS_TCP_PORT_RANGE :

Port range for Globus IO.

GSSKLOG :

yes or no, indicating whether the site provides an AFS authentication server which maps gsi credentials into Kerberos tokens .

GSSKLOG_SERVER :

If GSSKLOG is yes, the name of the AFS authentication server host.

INSTALL_ROOT :

Installation root - change if using the re-locatable distribution.

PX_HOST :

PX hostname.

SE_LIST :

A list of hostnames of the SEs available at your site.

SITE_NAME :

Your GIIS.

VOBOX_HOST :

VOBOX hostname.

VOS :

List of supported VOs. For each item listed in the VOS variable you need to create a set of new variables as follows:

VO_VO-NAME_SE :: Default SE used by the VO. WARNING: VO-NAME must be in capital cases.
VO_VO-NAME_SW_DIR :: Area on the WN for the installation of the experiment software. If on the WNs a predefined shared area has been mounted where VO managers can pre-install software, then these variable should point to this area. If instead there is not a shared area and each job must install the software, then this variables should contain a dot ( . ).Anyway the mounting of shared areas, as well as the local installation of VO software is not managed by yaim and should be handled locally by Site Administrators. WARNING: VO-NAME must be in capital cases.

The function does exit with return code 1 if they are not set.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_lcgenv

The code is reproduced also in 24.15..

Set-up DPM RFIO

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_DPM_rfio'.

rfiod ports (5001 TCP and UDP) are added to /etc/services.

The following is added to /etc/shift.conf:

RFIOD TRUST <DPM_HOST>
RFIOD WTRUST <DPM_HOST>
RFIOD RTRUST <DPM_HOST>
RFIOD XTRUST <DPM_HOST>
RFIOD FTRUST <DPM_HOST>

Both short and FQDN of the <DPM_HOST> are listed.

On the SE_dpm_mysql node the following is also added to /etc/shift.conf:

DPM TRUST <dpmpool_node>
DPNS TRUST <dpmpool_node>

For each of the pool nodes both short and FQDN are listed.

/etc/sysconfig/rfiod is created from /etc/sysconfig/rfiod.templ by setting the DPNS_HOST variable to <DPM_HOST>.

Finally, the RFIO daemon is restarted and configured to start on boot.

Specification of function: config_DPM_rfio

The function 'config_DPM_rfio' needs the following variables to be set in the configuration file:

DPMPOOL_NODES :: Space separated list of DPM pool hostname:/path entries".
DPM_HOST :: Host name of the DPM host, used also as a default DPM for the lcg-stdout-mon .
INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_DPM_rfio

The code is also reproduced in 24.16..

Create DPM user account

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_DPM_user'.

DPM Manager user (as defined by dpm flag in <USERS_CONF>) is created as a system account with home in /home/dpmmgr and /bin/tcsh as a default shell.

Specification of function: config_DPM_user

The function 'config_DPM_user' needs the following variables to be set in the configuration file:

USERS_CONF :: Path to the file containing a list of Linux users (pool accounts) to be created. This file should be created by the Site Administrator, which contains a plain list of the users and IDs. An example of this configuration file is given in /opt/lcg/yaim/examples/users.conf.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_DPM_user

The code is also reproduced in 24.17..

Set-up DPM certificates

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_DPM_mgr'.

/etc/grid-security/dpmmgr/ is created and host certificates are copied into it as dpmcert.pem and dpmkey.pem.

dpmmgr group is given write access to /etc/grid-security/gridmapdir/.

Host certificate is also installed as user certificate for edginfo user. This is so that edginfo user can run authenticated dpm-qryconf command.

Specification of function: config_DPM_mgr

The function 'config_DPM_mgr' needs the following variables to be set in the configuration file:

INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_DPM_mgr

The code is also reproduced in 24.18..

Set-up DPM Oracle backend

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_DPM_oracle'.

Oracle environment is set by executing the following commands:

export ORACLE_CERN=/afs/cern.ch/project/oracle
source $ORACLE_CERN/script/setoraenv.sh -s 10103
export TWO_TASK=$ORACLE_SERVER

DPM databases (cns_db and dpm_db) are created using

<INSTALL_ROOT>/lcg/share/DPM/create_dpns_tables_oracle.sql and
<INSTALL_ROOT>/lcg/share/DPM/create_dpm_tables_oracle.sql.

<INSTALL_ROOT>/lcg/etc/DPMCONFIG is created:

<DPMMGR>/<DPMUSER_PWD>@<ORACLE_SERVER>

Specification of function: config_DPM_oracle

The function 'config_DPM_oracle' needs the following variables to be set in the configuration file:

DPMDATA :: Directory where the data is stored (absolute path, e.g./storage).
DPMFSIZE :: The maximum file size managed (e.g.200M).
DPMMGR :: db user account for the DPM.
DPMPOOL :: .
DPMUSER_PWD :: Password of the db user account.
DPM_HOST :: Host name of the DPM host, used also as a default DPM for the lcg-stdout-mon .
INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.
VOS :: List of supported VOs.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_DPM_oracle

The code is also reproduced in 24.19..

Set-up DPM GSIFTP

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_DPM_gsiftp'.

/etc/sysconfig/dpm-gsiftp is created from the template in /etc/sysconfig/dpm-gsiftp.templ by setting the DPM and DPNS host to <DPM_HOST>.

DPM GSIFTP daemon is started.

Specification of function: config_DPM_gsiftp

The function 'config_DPM_gsiftp' needs the following variables to be set in the configuration file:

DPM_HOST :: Host name of the DPM host, used also as a default DPM for the lcg-stdout-mon .

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_DPM_gsiftp

The code is also reproduced in 24.20..

Set-up DPM SE

Author(s): Vidic,Valentin
Email : support-lcg-manual-install@cern.ch

This chapter describes the configuration steps done by the yaim function 'config_sedpm'.

For each of the DPM daemons (dpnsdaemon, dpm, srmv1, srmv2), an environment is set-up in /etc/sysconfig/<daemon>. These files are generated from templates (/etc/sysconfig/<daemon>.templ) by setting the following variables:

export DPNS_HOST=<DPM_HOST>
export DPM_HOST=<DPM_HOST>
NSCONFIGFILE=<INSTALL_ROOT>/lcg/etc/DPMCONFIG
DPMCONFIGFILE=<INSTALL_ROOT>/lcg/etc/DPMCONFIG

The daemons are then restarted and configured to start on boot.

DPM pool is created:

mkdir -p <DPMDATA>
chown dpmmgr:dpmmgr <DPMDATA>
<INSTALL_ROOT>/lcg/bin/dpm-addpool --poolname <DPMPOOL> --def_filesize <DPMFSIZE>
<INSTALL_ROOT>/lcg/bin/dpm-addfs   --poolname <DPMPOOL> --server <DPM_HOST> --fs <DPMDATA>

DPM filesystem is initialized:

<INSTALL_ROOT>/lcg/bin/dpns-mkdir /dpm
<INSTALL_ROOT>/lcg/bin/dpns-mkdir -m 755 -p /dpm/<MY_DOMAIN>
<INSTALL_ROOT>/lcg/bin/dpns-mkdir -m 755 -p /dpm/<MY_DOMAIN>/home

<INSTALL_ROOT>/lcg/bin/dpns-chmod 775 /dpm
<INSTALL_ROOT>/lcg/bin/dpns-chmod 775 /dpm/<MY_DOMAIN>
<INSTALL_ROOT>/lcg/bin/dpns-chmod 775 /dpm/<MY_DOMAIN>/home

<INSTALL_ROOT>/lcg/bin/dpns-setacl -m d:u::7,d:g::7,d:o:5 /dpm
<INSTALL_ROOT>/lcg/bin/dpns-setacl -m d:u::7,d:g::7,d:o:5 /dpm/<MY_DOMAIN>
<INSTALL_ROOT>/lcg/bin/dpns-setacl -m d:u::7,d:g::7,d:o:5 /dpm/<MY_DOMAIN>/home

For each of the supported VOs, a directory is set-up in DPM:

<INSTALL_ROOT>/lcg/bin/dpns-mkdir -m 775 /dpm/<MY_DOMAIN>/home/<vo>
<INSTALL_ROOT>/lcg/bin/dpns-chmod 775 /dpm/<MY_DOMAIN>/home/<vo>
<INSTALL_ROOT>/lcg/bin/dpns-chown root:<vo> /dpm/<MY_DOMAIN>/home/<vo>
<INSTALL_ROOT>/lcg/bin/dpns-setacl -m d:u::7,d:g::7,d:o:5 /dpm/<MY_DOMAIN>/home/<vo>

The last command sets default ACL for a directory. Default ACL is inherited as access ACL by the files or sub-directories created in that directory. Sub-directories also inherit the default ACL as default ACL.

Specification of function: config_sedpm

The function 'config_sedpm' needs the following variables to be set in the configuration file:

DPMDATA :: Directory where the data is stored (absolute path, e.g./storage).
DPMFSIZE :: The maximum file size managed (e.g.200M).
DPMPOOL :: .
DPM_HOST :: Host name of the DPM host, used also as a default DPM for the lcg-stdout-mon .
INSTALL_ROOT :: Installation root - change if using the re-locatable distribution.
MY_DOMAIN :: site's domain name.
SITE_EMAIL :: The e-mail address as published by the information system.
USERS_CONF :: Path to the file containing a list of Linux users (pool accounts) to be created. This file should be created by the Site Administrator, which contains a plain list of the users and IDs. An example of this configuration file is given in /opt/lcg/yaim/examples/users.conf.
VOS :: List of supported VOs.

The original code of the function can be found in:

/opt/lcg/yaim/functions/config_sedpm

The code is also reproduced in 24.21..

Source code

config_ldconf

config_ldconf () {

    INSTALL_ROOT=${INSTALL_ROOT:-/opt} 
    
cp -p /etc/ld.so.conf /etc/ld.so.conf.orig

    LIBDIRS="${INSTALL_ROOT}/globus/lib \
	     ${INSTALL_ROOT}/edg/lib \
             ${INSTALL_ROOT}/edg/externals/lib/ \
	     /usr/local/lib \
             ${INSTALL_ROOT}/lcg/lib \
             /usr/kerberos/lib \
             /usr/X11R6/lib \
             /usr/lib/qt-3.1/lib \
             ${INSTALL_ROOT}/gcc-3.2.2/lib \
             ${INSTALL_ROOT}/glite/lib \
             ${INSTALL_ROOT}/glite/externals/lib"

    
    if [ -f /etc/ld.so.conf.add ]; then
	rm -f /etc/ld.so.conf.add
    fi

    for libdir in ${LIBDIRS}; do 
	if  ( ! grep -q $libdir /etc/ld.so.conf && [ -d $libdir ] ); then
	    echo $libdir >> /etc/ld.so.conf.add
	fi
    done

    if [ -f /etc/ld.so.conf.add ]; then    
	sort -u /etc/ld.so.conf.add >> /etc/ld.so.conf  
	rm -f  /etc/ld.so.conf.add
    fi

    /sbin/ldconfig

    return 0
}

config_sysconfig_edg

config_sysconfig_edg(){

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

cat <<EOF > /etc/sysconfig/edg
EDG_LOCATION=$INSTALL_ROOT/edg
EDG_LOCATION_VAR=$INSTALL_ROOT/edg/var
EDG_TMP=/tmp
X509_USER_CERT=/etc/grid-security/hostcert.pem
X509_USER_KEY=/etc/grid-security/hostkey.pem
GRIDMAP=/etc/grid-security/grid-mapfile
GRIDMAPDIR=/etc/grid-security/gridmapdir/
EDG_WL_BKSERVERD_ADDOPTS=--rgmaexport 
EDG_WL_RGMA_FILE=/var/edgwl/logging/status.log
EOF

return 0
}

config_sysconfig_globus

config_sysconfig_globus() {

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

# If GLOBUS_TCP_PORT_RANGE is unset, give it a good default
# Leave it alone if it is set but empty
GLOBUS_TCP_PORT_RANGE=${GLOBUS_TCP_PORT_RANGE-"20000 25000"}

cat <<EOF > /etc/sysconfig/globus
GLOBUS_LOCATION=$INSTALL_ROOT/globus
GLOBUS_CONFIG=/etc/globus.conf
export LANG=C
EOF

# Set GLOBUS_TCP_PORT_RANGE, but not for nodes which are only WNs
if [ "$GLOBUS_TCP_PORT_RANGE" ] && ( ! echo $NODE_TYPE_LIST | egrep -q '^ *WN_?[[:alpha:]]* *$' ); then
    echo "GLOBUS_TCP_PORT_RANGE=\"$GLOBUS_TCP_PORT_RANGE\"" >> /etc/sysconfig/globus
fi

(
    # HACK to avoid complaints from services that do not need it,
    # but get started via a login shell before the file is created...

    f=$INSTALL_ROOT/globus/libexec/globus-script-initializer
    echo '' > $f
    chmod 755 $f
)

return 0
}

config_sysconfig_lcg

config_sysconfig_lcg(){

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

cat <<EOF > /etc/sysconfig/lcg
LCG_LOCATION=$INSTALL_ROOT/lcg
LCG_LOCATION_VAR=$INSTALL_ROOT/lcg/var
LCG_TMP=/tmp
export SITE_NAME=$SITE_NAME
EOF

return 0
}

config_crl

config_crl(){

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

let minute="$RANDOM%60"

let h1="$RANDOM%24"
let h2="($h1+6)%24"
let h3="($h1+12)%24"
let h4="($h1+18)%24"

if !( echo "${NODE_TYPE_LIST}" | grep TAR > /dev/null ); then

    if [ ! -f /etc/cron.d/edg-fetch-crl ]; then
	echo "Now updating the CRLs - this may take a few minutes..."
	$INSTALL_ROOT/edg/etc/cron/edg-fetch-crl-cron >> /var/log/edg-fetch-crl-cron.log 2>&1
    fi

cron_job edg-fetch-crl root "$minute $h1,$h2,$h3,$h4 * * * $INSTALL_ROOT/edg/etc/cron/edg-fetch-crl-cron >> /var/log/edg-fetch-crl-cron.log 2>&1"

    cat <<EOF > /etc/logrotate.d/edg-fetch
/var/log/edg-fetch-crl-cron.log  {
    compress
    monthly
    rotate 12
    missingok
    ifempty
    create
}
EOF

else

    cron_job edg-fetch-crl `whoami` "$minute $h1,$h2,$h3,$h4 * * * $INSTALL_ROOT/edg/etc/cron/edg-fetch-crl-cron >> $INSTALL_ROOT/edg/var/log/edg-fetch-crl-cron.log 2>&1"
    if [ ! -d $INSTALL_ROOT/edg/var/log ]; then
	mkdir -p $INSTALL_ROOT/edg/var/log
    fi
    echo "Now updating the CRLs - this may take a few minutes..."
    $INSTALL_ROOT/edg/etc/cron/edg-fetch-crl-cron >> $INSTALL_ROOT/edg/var/log/edg-fetch-crl-cron.log 2>&1

fi

return 0
}

config_rfio

config_rfio() {

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

# This function turns rfio on where necessary and
# just as important, turns it off where it isn't necessary

if ( echo "${NODE_TYPE_LIST}" | grep -q SE_classic ); then

    if [ "x`grep rfio /etc/services | grep tcp`" = "x"  ]; then
	echo "rfio     5001/tcp" >> /etc/services
    fi

    if [ "x`grep rfio /etc/services | grep udp`" = "x"  ]; then
	echo "rfio     5001/udp" >> /etc/services
    fi

    /sbin/service rfiod restart

elif ( echo "${NODE_TYPE_LIST}" | grep -q SE_dpm ); then

    return 0

elif (  rpm -qa | grep -q CASTOR-client ); then 

    /sbin/service rfiod stop
    /sbin/chkconfig --level 2345 rfiod off

fi

return 0

}

config_host_certs

config_host_certs(){

if [ -f /etc/grid-security/hostkey.pem ]; then
    chmod 400 /etc/grid-security/hostkey.pem
elif  [ -f /etc/grid-security/hostcert.pem ]; then
    chmod 644 /etc/grid-security/hostcert.pem
else
    echo "Please copy the hostkey.pem and hostcert.pem to /etc/grid-security"
    return 1
fi
return 0
}

config_users

config_users(){
#
# Creates the Pool Users.
#
# Takes the users, groups and ids from a configuration file (USERS_CONF).
# File format: 
#
# UserId:User:GroupId:Group
#

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

requires USERS_CONF VOS

if [ ! -e $USERS_CONF ]; then
    echo "$USERS_CONF not found."
    return 1	
fi

check_users_conf_format

# Add each group required by $VOS
awk -F: '{print $3, $4, $5}' ${USERS_CONF} | sort -u | while read gid groupname virtorg; do
    if ( [ "$virtorg" ] && echo $VOS | grep -w "$virtorg" > /dev/null ); then
	groupadd -g $gid $groupname 2> /dev/null
    fi
done

grid_accounts=
newline='
'

# Add all the users for each VO in ${VOS}
for x in `cat $USERS_CONF`; do 
    # ensure that this VO is in the $VOS list
    virtorg=`echo $x | cut -d":" -f5`
    if ( [ "$virtorg" ] && echo $VOS | grep -w "$virtorg" > /dev/null ); then
	user=`echo $x | cut -d":" -f2`
	id=`echo $x | cut -d":" -f1`
	group=`echo $x | cut -d":" -f3`
	if ( ! id $user > /dev/null 2>&1 ); then
	    useradd -c "mapped user for group ID $group" -u $id -g $group $user
	fi

	# grid users shall not be able to submit at or cron jobs
	for deny in /etc/at.deny /etc/cron.deny; do
	    tmp=$deny.$$
	    touch $deny
	    (grep -v "^$user\$" $deny; echo "$user") > $tmp && mv $tmp $deny
	done

	grid_accounts="$grid_accounts$newline$user"
    fi
done

(
    cga=$INSTALL_ROOT/lcg/etc/cleanup-grid-accounts.conf
    cga_tmp=$cga.$$

    [ -r $cga ] || exit

    (
	sed '/YAIM/,$d' $cga
	echo "# next lines added by YAIM on `date`"
	echo "ACCOUNTS='$grid_accounts$newline'"
    ) > $cga_tmp

    mv $cga_tmp $cga
)

let minute="$RANDOM%60"
let h="$RANDOM%6"
f=/var/log/cleanup-grid-accounts.log

if ( echo "${NODE_TYPE_LIST}" | grep '\<CE' > /dev/null ); then

    cron_job cleanup-grid-accounts root "$minute $h * * * \
$INSTALL_ROOT/lcg/sbin/cleanup-grid-accounts.sh -v -F >> $f 2>&1"

    cat <<EOF > /etc/logrotate.d/cleanup-grid-accounts
$f {
    compress
    daily
    rotate 30
    missingok
}
EOF

elif ( echo "${NODE_TYPE_LIST}" | grep '\<WN' > /dev/null ); then

    cron_job cleanup-grid-accounts root "$minute $h * * * \
$INSTALL_ROOT/lcg/sbin/cleanup-grid-accounts.sh -v >> $f 2>&1"

    cat <<EOF > /etc/logrotate.d/cleanup-grid-accounts
$f {
    compress
    daily
    rotate 30
    missingok
}
EOF

fi

return 0
}

config_edgusers

config_edgusers(){

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

check_users_conf_format

if ( ! id edguser > /dev/null 2>&1 ); then
    useradd -r -c "EDG User" edguser
    mkdir -p /home/edguser
    chown edguser:edguser /home/edguser
fi

if ( ! id edginfo > /dev/null 2>&1 ); then
    useradd -r -c "EDG Info user" edginfo
    mkdir -p /home/edginfo
    chown edginfo:edginfo /home/edginfo
fi

if ( ! id rgma > /dev/null 2>&1 ); then
    useradd -r -c "RGMA user" -m -d ${INSTALL_ROOT}/glite/etc/rgma rgma
fi

# Make sure edguser is a member of each group

awk -F: '{print $3, $4, $5}' ${USERS_CONF} | sort -u | while read gid groupname virtorg; do
    if ( [ "$virtorg" ] && echo $VOS | grep -w "$virtorg" > /dev/null ); then
	# On some nodes the users are not created, so the group will not exist
	# Isn't there a better way to check for group existance??
	if ( grep "^${groupname}:" /etc/group > /dev/null ); then
	    gpasswd -a edguser $groupname  > /dev/null
	fi
    fi
done

return 0
}

config_mkgridmap

config_mkgridmap(){

requires USERS_CONF GROUPS_CONF VOS

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

if [ ! -e $USERS_CONF ]; then
    echo "$USERS_CONF not found."
    return 1
fi

if [ ! -e $GROUPS_CONF ]; then
    echo "$GROUPS_CONF not found."
    return 1
fi

check_users_conf_format

gmc=$INSTALL_ROOT/edg/etc/edg-mkgridmap.conf
gmd=/etc/grid-security/gridmapdir

mkdir -p $gmd
chown root:edguser $gmd
chmod 775 $gmd

for user in `awk -F: '$6==""{print $2}' $USERS_CONF`; do
    f=$gmd/$user
    [ -f $f ] || touch $f
done

if ( echo "${NODE_TYPE_LIST}" | egrep -q 'dpm|LFC' ); then
    gmc_dm=$INSTALL_ROOT/lcg/etc/lcgdm-mkgridmap.conf
else
    gmc_dm=/dev/null
fi

cat << EOF > $gmc
##############################################################################
#
# edg-mkgridmap.conf generated by YAIM on `date`
#
##############################################################################

EOF

cat << EOF > $gmc_dm
##############################################################################
#
# lcgdm-mkgridmap.conf generated by YAIM on `date`
#
##############################################################################

EOF

lcmaps=${INSTALL_ROOT}/edg/etc/lcmaps
lcmaps_gridmapfile=$lcmaps/gridmapfile
lcmaps_groupmapfile=$lcmaps/groupmapfile

mkdir -p $lcmaps
rm -f $lcmaps_gridmapfile $lcmaps_groupmapfile

for VO in `echo $VOS | tr '[:lower:]' '[:upper:]'`; do

    # Set some variables

    VO_lower=`echo $VO | tr '[:upper:]' '[:lower:]'`

    vo_user_prefix=`users_getvoprefix $VO`
    [ -z "$vo_user_prefix" ] && vo_user_prefix=$VO_lower

    vo_group=`users_getvogroup $VO`

    sgmuser=`users_getsgmuser $VO`
    prduser=`users_getprduser $VO`

    eval voms_pool='$'VO_${VO}_VOMS_POOL_PATH
    test -z "$voms_pool" || voms_pool=/${voms_pool#/}

    eval voms_servers='$'VO_${VO}_VOMS_SERVERS

    vo_match=/VO=$VO_lower/GROUP=/$VO_lower
    role_match=$vo_match/ROLE=

    echo "# $VO" >> $gmc

    ### VOMS sgm
    if [ "$sgmuser" -a "$voms_servers" ]; then

	#
	# "/VO=dteam/GROUP=/dteam/ROLE=lcgadmin":::sgm:
	#

	role=`sed -n 's|^"'"$role_match"'\(.*\)":.*:sgm:* *$|\1|p' $GROUPS_CONF`

	echo "# Map VO members (Role) $sgmuser" >> $gmc

	split_quoted_variable $voms_servers | while read server; do
	    echo "group ${server%/}/Role=$role $sgmuser"  >> $gmc
	    echo "group ${server%/}/Role=$role $VO_lower" >> $gmc_dm
	done
	echo >> $gmc
    fi

    ### VOMS prd
    if [ "$prduser" -a "$voms_servers" ]; then

	#
	# "/VO=dteam/GROUP=/dteam/ROLE=production":::prd:
	#

	role=`sed -n 's|^"'"$role_match"'\(.*\)":.*:prd:* *$|\1|p' $GROUPS_CONF`

	echo "# Map VO members (Role) $prduser" >> $gmc

	split_quoted_variable $voms_servers | while read server; do
	    echo "group ${server%/}/Role=$role $prduser"  >> $gmc
	    echo "group ${server%/}/Role=$role $VO_lower" >> $gmc_dm
	done
	echo >> $gmc
    fi

    ### VOMS pool
    if [ "$voms_servers" ]; then
	echo "# Map VO members  (root Group) $VO_lower" >> $gmc

	split_quoted_variable $voms_servers | while read server; do
	    echo "group ${server%/}${voms_pool} .$vo_user_prefix" >> $gmc
	    echo "group ${server%/}${voms_pool} $VO_lower"        >> $gmc_dm
	done
	echo >> $gmc
    fi

    echo "# LDAP lines for ${VO}" >> $gmc

    ### LDAP sgm
    if [ "$sgmuser" ]; then
	eval ldap_sgm='$'VO_${VO}_SGM
	test -z "$ldap_sgm" || {
	    echo "group $ldap_sgm $sgmuser"  >> $gmc
	    echo "group $ldap_sgm $VO_lower" >> $gmc_dm
	}
    fi

    ### LDAP pool
    eval ldap_users='$'VO_${VO}_USERS
    test -z "$ldap_users" || {
	echo "group $ldap_users .$vo_user_prefix" >> $gmc
	echo "group $ldap_users $VO_lower"        >> $gmc_dm
    }

    echo >> $gmc
    echo >> $gmc

    ### VOMS gridmapfile and groupmapfile

    #
    # "/VO=cms/GROUP=/cms/ROLE=lcgadmin":::sgm:
    # "/VO=cms/GROUP=/cms/ROLE=production":::prd:
    # "/VO=cms/GROUP=/cms/GROUP=HeavyIons":cms01:1340::
    # "/VO=cms/GROUP=/cms/GROUP=Higgs":cms02:1341::
    # "/VO=cms/GROUP=/cms/GROUP=StandardModel":cms03:1342::
    # "/VO=cms/GROUP=/cms/GROUP=Susy":cms04:1343::
    # "/VO=cms/GROUP=/cms"::::
    #

    sed -n '/^"\/VO='"$VO_lower"'\//p' $GROUPS_CONF | while read line; do

	fqan=` echo "$line" | sed 's/":.*/"/' `
	line=` echo "$line" | sed 's/.*"://'  `
	group=`echo "$line" | sed 's/:.*//'   `
	line=` echo "$line" | sed 's/[^:]*://'`
	gid=`  echo "$line" | sed 's/:.*//'   `
	line=` echo "$line" | sed 's/[^:]*://'`
	flag=` echo "$line" | sed 's/:.*//'   `

	if [ "$flag" = sgm ]; then

	    u=$sgmuser
	    g=$vo_group

	elif [ "$flag" = prd ]; then

	    u=$prduser
	    g=$vo_group

	elif [ "$group" ]; then

	    groupadd ${gid:+"-g"} ${gid:+"$gid"} "$group" 2>&1 | grep -v exists

	    u=.$vo_user_prefix
	    g=$group

	else

	    u=.$vo_user_prefix
	    g=$vo_group
	fi

	echo "$fqan $u" >> $lcmaps_gridmapfile
	echo "$fqan $g" >> $lcmaps_groupmapfile

    done

done # End of VO loop

cat << EOF >> $gmc
#############################################################################
# List of auth URIs
# eg 'auth ldap://marianne.in2p3.fr/ou=People,o=testbed,dc=eu-datagrid,dc=org'
# If these are defined then users must be authorised in one of the following
# auth servers.


# A list of authorised users.
EOF

GRIDMAP_AUTH=${GRIDMAP_AUTH:-\
ldap://lcg-registrar.cern.ch/ou=users,o=registrar,dc=lcg,dc=org}

for i in $GRIDMAP_AUTH; do
    echo "auth $i" >> $gmc
    echo "auth $i" >> $gmc_dm
    echo >> $gmc
done

f=$INSTALL_ROOT/edg/etc/grid-mapfile-local

[ -f $f ] || touch $f

cat << EOF >> $gmc
#############################################################################
# DEFAULT_LCLUSER: default_lcluser lcluser
# default_lcuser .


#############################################################################
# ALLOW and DENY: deny|allow pattern_to_match
# allow *INFN*


#############################################################################
# Local grid-mapfile to import and overide all the above information.
# eg, gmf_local $f

gmf_local $f
EOF

if [ ${gmc_dm:-/dev/null} != /dev/null ]; then
    f=${INSTALL_ROOT}/lcg/etc/lcgdm-mapfile-local

    [ -f $f ] || touch $f
fi

cat << EOF >> $gmc_dm
gmf_local $f
EOF

#
# bootstrap the grid-mapfile
#

cmd="$INSTALL_ROOT/edg/sbin/edg-mkgridmap \
--output=/etc/grid-security/grid-mapfile --safe"

echo "Now creating the grid-mapfile - this may take a few minutes..."

$cmd 2>> $YAIM_LOG

let minute="$RANDOM%60"

let h1="$RANDOM%6"
let h2="$h1+6"
let h3="$h2+6"
let h4="$h3+6"

cron_job edg-mkgridmap root "$minute $h1,$h2,$h3,$h4 * * * $cmd"

if ( echo "${NODE_TYPE_LIST}" | egrep -q 'dpm|LFC' ); then

    cmd="$INSTALL_ROOT/edg/libexec/edg-mkgridmap/edg-mkgridmap.pl \
--conf=$gmc_dm --output=$INSTALL_ROOT/lcg/etc/lcgdm-mapfile --safe"

    echo "Now creating the lcgdm-mapfile - this may take a few minutes..."

    $cmd 2>> $YAIM_LOG

    let minute="$RANDOM%60"

    let h1="$RANDOM%6"
    let h2="$h1+6"
    let h3="$h2+6"
    let h4="$h3+6"

    cron_job lcgdm-mkgridmap root "$minute $h1,$h2,$h3,$h4 * * * $cmd"

fi

if ( echo "${NODE_TYPE_LIST}" | grep -q '\<'RB ); then

    cron_job lcg-expiregridmapdir root  "5 * * * * \
${INSTALL_ROOT}/edg/sbin/lcg-expiregridmapdir.pl -e 240 -v >> \
/var/log/lcg-expiregridmapdir.log 2>&1"

elif ( echo "${NODE_TYPE_LIST}" | egrep -q 'dpm|LFC' ); then

    # No expiry
    rm -f ${CRON_DIR}/lcg-expiregridmapdir

else

    cron_job lcg-expiregridmapdir root  "5 * * * * \
${INSTALL_ROOT}/edg/sbin/lcg-expiregridmapdir.pl -v >> \
/var/log/lcg-expiregridmapdir.log 2>&1"

fi

return 0
}

config_java

function config_java () {

INSTALL_ROOT=${INSTALL_ROOT:-/opt} 

# If JAVA_LOCATION is not set by the admin, take a guess
if [ -z "$JAVA_LOCATION" ]; then
    java=`rpm -qa | grep j2sdk-` || java=`rpm -qa | grep j2re`
    if [ "$java" ]; then
	JAVA_LOCATION=`rpm -ql $java | egrep '/bin/java$' | sort | head -1 | sed 's#/bin/java##'`
    fi
fi

if [ ! "$JAVA_LOCATION" -o ! -d "$JAVA_LOCATION" ]; then
   echo "Please check your value for JAVA_LOCATION"
   return 1
fi

if ( echo "${NODE_TYPE_LIST}" | grep TAR > /dev/null ); then

# We're configuring a relocatable distro

    if [ ! -d ${INSTALL_ROOT}/edg/etc/profile.d ]; then
	mkdir -p ${INSTALL_ROOT}/edg/etc/profile.d/
    fi

    cat  > $INSTALL_ROOT/edg/etc/profile.d/j2.sh <<EOF

JAVA_HOME=$JAVA_LOCATION
export JAVA_HOME
EOF

    cat  > $INSTALL_ROOT/edg/etc/profile.d/j2.csh <<EOF

setenv JAVA_HOME $JAVA_LOCATION
EOF

    chmod a+rx $INSTALL_ROOT/edg/etc/profile.d/j2.sh
    chmod a+rx $INSTALL_ROOT/edg/etc/profile.d/j2.csh

    return 0

fi # end of relocatable stuff

# We're root and it's not a relocatable

if [ ! -d /etc/java ]; then
    mkdir /etc/java
fi

echo "export JAVA_HOME=$JAVA_LOCATION" > /etc/java/java.conf
echo "export JAVA_HOME=$JAVA_LOCATION" > /etc/java.conf
chmod +x /etc/java/java.conf 

#This hack is here due to SL and the java profile rpms, Laurence Field

if [ ! -d ${INSTALL_ROOT}/edg/etc/profile.d ]; then
    mkdir -p ${INSTALL_ROOT}/edg/etc/profile.d/
fi

cat << EOF > $INSTALL_ROOT/edg/etc/profile.d/j2.sh
if [ -z "\$PATH" ]; then
   export PATH=${JAVA_LOCATION}/bin
else
   export PATH=${JAVA_LOCATION}/bin:\${PATH}
fi
EOF

chmod a+rx $INSTALL_ROOT/edg/etc/profile.d/j2.sh

cat << EOF > $INSTALL_ROOT/edg/etc/profile.d/j2.csh
if ( \$?PATH ) then
    setenv PATH ${JAVA_LOCATION}/bin:\${PATH}
else
    setenv PATH ${JAVA_LOCATION}/bin
endif
EOF

chmod a+rx $INSTALL_ROOT/edg/etc/profile.d/j2.csh

return 0

}

config_rgma_client

config_rgma_client(){

requires MON_HOST REG_HOST

INSTALL_ROOT=${INSTALL_ROOT:-/opt} 

# NB java stuff now in config_java, which must be run before

export RGMA_HOME=${INSTALL_ROOT}/glite

# in order to use python from userdeps.tgz we need to source the env
if ( echo "${NODE_TYPE_LIST}" | grep TAR > /dev/null ); then
    . $INSTALL_ROOT/etc/profile.d/grid_env.sh
fi

${RGMA_HOME}/share/rgma/scripts/rgma-setup.py --secure=yes --server=${MON_HOST} --registry=${REG_HOST} --schema=${REG_HOST} 

cat << EOF > ${INSTALL_ROOT}/edg/etc/profile.d/edg-rgma-env.sh
export RGMA_HOME=${INSTALL_ROOT}/glite
export APEL_HOME=${INSTALL_ROOT}/glite

echo \$PYTHONPATH | grep -q ${INSTALL_ROOT}/glite/lib/python && isthere=1 || isthere=0
if [ \$isthere = 0 ]; then
    if [ -z \$PYTHONPATH ]; then
        export PYTHONPATH=${INSTALL_ROOT}/glite/lib/python
    else
        export PYTHONPATH=\$PYTHONPATH:${INSTALL_ROOT}/glite/lib/python
    fi
fi

echo \$LD_LIBRARY_PATH | grep -q ${INSTALL_ROOT}/glite/lib && isthere=1 || isthere=0
if [ \$isthere = 0 ]; then
    if [ -z \$LD_LIBRARY_PATH ]; then
        export LD_LIBRARY_PATH=${INSTALL_ROOT}/glite/lib
    else
        export LD_LIBRARY_PATH=\$LD_LIBRARY_PATH:${INSTALL_ROOT}/glite/lib
    fi
fi
EOF

chmod a+rx ${INSTALL_ROOT}/edg/etc/profile.d/edg-rgma-env.sh

cat << EOF > ${INSTALL_ROOT}/edg/etc/profile.d/edg-rgma-env.csh
setenv RGMA_HOME ${INSTALL_ROOT}/glite
setenv APEL_HOME ${INSTALL_ROOT}/glite

echo \$PYTHONPATH | grep -q ${INSTALL_ROOT}/glite/lib/python && set isthere=1 || set isthere=0
if ( \$isthere == 0 ) then
    if ( -z \$PYTHONPATH ) then
        setenv PYTHONPATH ${INSTALL_ROOT}/glite/lib/python
    else
        setenv PYTHONPATH \$PYTHONPATH\:${INSTALL_ROOT}/glite/lib/python
    endif
endif

echo \$LD_LIBRARY_PATH | grep -q ${INSTALL_ROOT}/glite/lib && set isthere=1 || set isthere=0
if ( \$isthere == 0 ) then
    if ( -z \$LD_LIBRARY_PATH ) then
        setenv LD_LIBRARY_PATH ${INSTALL_ROOT}/glite/lib
    else
        setenv LD_LIBRARY_PATH \$LD_LIBRARY_PATH\:${INSTALL_ROOT}/glite/lib
    endif
endif
EOF

chmod a+rx  ${INSTALL_ROOT}/edg/etc/profile.d/edg-rgma-env.csh

return 0
}

config_gip

config_gip () {

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

requires CE_HOST RB_HOST PX_HOST 

#check_users_conf_format

#set some vars for storage elements
if ( echo "${NODE_TYPE_LIST}" | grep '\<SE' > /dev/null ); then
    requires VOS SITE_EMAIL SITE_NAME BDII_HOST VOS SITE_NAME
    if ( echo "${NODE_TYPE_LIST}" | grep SE_dpm > /dev/null ); then
	requires DPM_HOST
	se_host=$DPM_HOST
	se_type="srm_v1"
	control_protocol=srm_v1
	control_endpoint=httpg://${se_host}
    elif ( echo "${NODE_TYPE_LIST}" | grep SE_dcache > /dev/null ); then
	requires DCACHE_ADMIN
	se_host=$DCACHE_ADMIN
	se_type="srm_v1"
	control_protocol=srm_v1
	control_endpoint=httpg://${se_host}
    else
	requires CLASSIC_STORAGE_DIR CLASSIC_HOST VO__STORAGE_DIR
	se_host=$CLASSIC_HOST
	se_type="disk"
	control_protocol=classic
	control_endpoint=classic
    fi
fi

if ( echo "${NODE_TYPE_LIST}" | grep '\<CE' > /dev/null ); then

    # GlueSite

    requires SITE_EMAIL SITE_NAME SITE_LOC SITE_LAT SITE_LONG SITE_WEB \
	SITE_TIER SITE_SUPPORT_SITE SE_LIST

    outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-site.conf

    # set default SEs if they're currently undefined
    default_se=`set x $SE_LIST; echo "$2"`
    if [ "$default_se" ]; then
	for VO in `echo $VOS | tr '[:lower:]' '[:upper:]'`; do
	    if [ "x`eval echo '$'VO_${VO}_DEFAULT_SE`" = "x" ]; then
		eval VO_${VO}_DEFAULT_SE=$default_se
	    fi
	done
    fi

    cat << EOF > $outfile
dn: GlueSiteUniqueID=$SITE_NAME
GlueSiteUniqueID: $SITE_NAME
GlueSiteName: $SITE_NAME
GlueSiteDescription: LCG Site
GlueSiteUserSupportContact: mailto: $SITE_EMAIL
GlueSiteSysAdminContact: mailto: $SITE_EMAIL
GlueSiteSecurityContact: mailto: $SITE_EMAIL
GlueSiteLocation: $SITE_LOC
GlueSiteLatitude: $SITE_LAT
GlueSiteLongitude: $SITE_LONG
GlueSiteWeb: $SITE_WEB
GlueSiteSponsor: none
GlueSiteOtherInfo: $SITE_TIER
GlueSiteOtherInfo: $SITE_SUPPORT_SITE
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
    $INSTALL_ROOT/lcg/etc/GlueSite.template > \
    $INSTALL_ROOT/lcg/var/gip/ldif/static-file-Site.ldif

    # GlueCluster

    requires JOB_MANAGER CE_BATCH_SYS VOS QUEUES CE_BATCH_SYS CE_CPU_MODEL \
	CE_CPU_VENDOR CE_CPU_SPEED CE_OS CE_OS_RELEASE CE_MINPHYSMEM \
	CE_MINVIRTMEM CE_SMPSIZE CE_SI00 CE_SF00 CE_OUTBOUNDIP CE_INBOUNDIP \
	CE_RUNTIMEENV

    outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-cluster.conf

    for VO in $VOS; do
        dir=${INSTALL_ROOT}/edg/var/info/$VO
        mkdir -p $dir
	f=$dir/$VO.list
	[ -f $f ] || touch $f
        # work out the sgm user for this VO
        sgmuser=`users_getsgmuser $VO`
	sgmgroup=`id -g $sgmuser`
	chown -R ${sgmuser}:${sgmgroup} $dir
	chmod -R go-w $dir
    done

    cat <<EOF > $outfile

dn: GlueClusterUniqueID=${CE_HOST}
GlueClusterName: ${CE_HOST}
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
GlueInformationServiceURL: ldap://`hostname -f`:2135/mds-vo-name=local,o=grid
EOF

    for QUEUE in $QUEUES; do
        echo "GlueClusterService: ${CE_HOST}:2119/jobmanager-$JOB_MANAGER-$QUEUE" >> $outfile
    done

    for QUEUE in $QUEUES; do
        echo "GlueForeignKey:" \
	    "GlueCEUniqueID=${CE_HOST}:2119/jobmanager-$JOB_MANAGER-$QUEUE" >> $outfile
    done

    cat << EOF >> $outfile

dn: GlueSubClusterUniqueID=${CE_HOST}, GlueClusterUniqueID=${CE_HOST}
GlueChunkKey: GlueClusterUniqueID=${CE_HOST}
GlueHostArchitectureSMPSize: $CE_SMPSIZE
GlueHostBenchmarkSF00: $CE_SF00
GlueHostBenchmarkSI00: $CE_SI00
GlueHostMainMemoryRAMSize: $CE_MINPHYSMEM
GlueHostMainMemoryVirtualSize: $CE_MINVIRTMEM
GlueHostNetworkAdapterInboundIP: $CE_INBOUNDIP
GlueHostNetworkAdapterOutboundIP: $CE_OUTBOUNDIP
GlueHostOperatingSystemName: $CE_OS
GlueHostOperatingSystemRelease: $CE_OS_RELEASE
GlueHostOperatingSystemVersion: 3
GlueHostProcessorClockSpeed: $CE_CPU_SPEED
GlueHostProcessorModel: $CE_CPU_MODEL
GlueHostProcessorVendor: $CE_CPU_VENDOR
GlueSubClusterName: ${CE_HOST}
GlueSubClusterPhysicalCPUs: 0
GlueSubClusterLogicalCPUs: 0
GlueSubClusterTmpDir: /tmp
GlueSubClusterWNTmpDir: /tmp
GlueInformationServiceURL: ldap://`hostname -f`:2135/mds-vo-name=local,o=grid
EOF

    for x in $CE_RUNTIMEENV; do
        echo "GlueHostApplicationSoftwareRunTimeEnvironment: $x" >>  $outfile
    done

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
    $INSTALL_ROOT/lcg/etc/GlueCluster.template > \
    $INSTALL_ROOT/lcg/var/gip/ldif/static-file-Cluster.ldif

    # GlueCE

    outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-ce.conf

    cat /dev/null > $outfile

    for QUEUE in $QUEUES; do
        cat <<EOF >> $outfile


dn: GlueCEUniqueID=${CE_HOST}:2119/jobmanager-$JOB_MANAGER-$QUEUE
GlueCEHostingCluster: ${CE_HOST}
GlueCEName: $QUEUE
GlueCEInfoGatekeeperPort: 2119
GlueCEInfoHostName: ${CE_HOST}
GlueCEInfoLRMSType: $CE_BATCH_SYS
GlueCEInfoLRMSVersion: not defined
GlueCEInfoTotalCPUs: 0
GlueCEInfoJobManager: ${JOB_MANAGER}
GlueCEInfoContactString: ${CE_HOST}:2119/jobmanager-${JOB_MANAGER}-${QUEUE}
GlueCEInfoApplicationDir: ${VO_SW_DIR}
GlueCEInfoDataDir: ${CE_DATADIR:-unset}
GlueCEInfoDefaultSE: $default_se
GlueCEStateEstimatedResponseTime: 0
GlueCEStateFreeCPUs: 0
GlueCEStateRunningJobs: 0
GlueCEStateStatus: Production
GlueCEStateTotalJobs: 0
GlueCEStateWaitingJobs: 0
GlueCEStateWorstResponseTime: 0
GlueCEStateFreeJobSlots: 0
GlueCEPolicyMaxCPUTime: 0
GlueCEPolicyMaxRunningJobs: 0
GlueCEPolicyMaxTotalJobs: 0
GlueCEPolicyMaxWallClockTime: 0
GlueCEPolicyPriority: 1
GlueCEPolicyAssignedJobSlots: 0
GlueForeignKey: GlueClusterUniqueID=${CE_HOST}
GlueInformationServiceURL: ldap://`hostname -f`:2135/mds-vo-name=local,o=grid
EOF

        for VO in `echo $VOS | tr '[:lower:]' '[:upper:]'`; do
            for VO_QUEUE in `eval echo '$'VO_${VO}_QUEUES`; do
                if [ "${QUEUE}" = "${VO_QUEUE}" ]; then
                    echo "GlueCEAccessControlBaseRule:" \
			"VO:`echo $VO | tr '[:upper:]' '[:lower:]'`" >> $outfile
                fi
            done
        done

	for VO in `echo $VOS | tr '[:lower:]' '[:upper:]'`; do
            for VO_QUEUE in `eval echo '$'VO_${VO}_QUEUES`; do
                if [ "${QUEUE}" = "${VO_QUEUE}" ]; then
		    cat << EOF >> $outfile

dn: GlueVOViewLocalID=`echo $VO | tr '[:upper:]' '[:lower:]'`,\
GlueCEUniqueID=${CE_HOST}:2119/jobmanager-${JOB_MANAGER}-${QUEUE}
GlueCEAccessControlBaseRule: VO:`echo $VO | tr '[:upper:]' '[:lower:]'`
GlueCEStateRunningJobs: 0
GlueCEStateWaitingJobs: 0
GlueCEStateTotalJobs: 0
GlueCEStateFreeJobSlots: 0
GlueCEStateEstimatedResponseTime: 0
GlueCEStateWorstResponseTime: 0
GlueCEInfoDefaultSE:  `eval echo '$'VO_${VO}_DEFAULT_SE`
GlueCEInfoApplicationDir:  `eval echo '$'VO_${VO}_SW_DIR`
GlueCEInfoDataDir: ${CE_DATADIR:-unset}
GlueChunkKey: GlueCEUniqueID=${CE_HOST}:2119/jobmanager-${JOB_MANAGER}-${QUEUE}
EOF
                fi
	    done
	done
    done

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
    $INSTALL_ROOT/lcg/etc/GlueCE.template > \
    $INSTALL_ROOT/lcg/var/gip/ldif/static-file-CE.ldif


    # GlueCESEBind

    outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-cesebind.conf
    echo "" > $outfile

    for QUEUE in $QUEUES
      do
      echo "dn: GlueCESEBindGroupCEUniqueID=${CE_HOST}:2119/jobmanager-$JOB_MANAGER-$QUEUE" \
	>> $outfile
      for se in $SE_LIST
        do
        echo "GlueCESEBindGroupSEUniqueID: $se" >> $outfile
        done
    done

    for se in $SE_LIST; do

	case "$se" in
	"$DPM_HOST") accesspoint=$DPMDATA;;
	"$DCACHE_ADMIN") accesspoint="/pnfs/`hostname -d`/data";;
	*) accesspoint=$CLASSIC_STORAGE_DIR ;;
	esac

        for QUEUE in $QUEUES; do

            cat <<EOF >> $outfile

dn: GlueCESEBindSEUniqueID=$se,\
GlueCESEBindGroupCEUniqueID=${CE_HOST}:2119/jobmanager-$JOB_MANAGER-$QUEUE
GlueCESEBindCEAccesspoint: $accesspoint
GlueCESEBindCEUniqueID: ${CE_HOST}:2119/jobmanager-$JOB_MANAGER-$QUEUE
GlueCESEBindMountInfo: $accesspoint
GlueCESEBindWeight: 0


EOF
        done
    done

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
    $INSTALL_ROOT/lcg/etc/GlueCESEBind.template > \
    $INSTALL_ROOT/lcg/var/gip/ldif/static-file-CESEBind.ldif

    # Set some vars based on the LRMS

    case "$CE_BATCH_SYS" in
    condor|CONDOR) plugin="${INSTALL_ROOT}/lcg/libexec/lcg-info-dynamic-condor /opt/condor/bin/ $INSTALL_ROOT/lcg/etc/lcg-info-generic.conf";;
    lsf|LSF)       plugin="${INSTALL_ROOT}/lcg/libexec/lcg-info-dynamic-lsf /usr/local/lsf/bin/ $INSTALL_ROOT/lcg/etc/lcg-info-generic.conf";;
    pbs|PBS)       plugin="${INSTALL_ROOT}/lcg/libexec/lcg-info-dynamic-pbs /opt/lcg/var/gip/ldif/static-file-CE.ldif ${TORQUE_SERVER}"
		   vo_max_jobs_cmd="";;
    *)             plugin="${INSTALL_ROOT}/lcg/libexec/lcg-info-dynamic-pbs /opt/lcg/var/gip/ldif/static-file-CE.ldif ${TORQUE_SERVER}"
		   vo_max_jobs_cmd="$INSTALL_ROOT/lcg/libexec/vomaxjobs-maui";;
    esac

    # Configure the dynamic plugin appropriate for the batch sys

    cat << EOF  > ${INSTALL_ROOT}/lcg/var/gip/plugin/lcg-info-dynamic-ce
#!/bin/sh
$plugin
EOF

    chmod +x ${INSTALL_ROOT}/lcg/var/gip/plugin/lcg-info-dynamic-ce

    # Configure the ERT plugin

    cat << EOF > ${INSTALL_ROOT}/lcg/var/gip/plugin/lcg-info-dynamic-scheduler-wrapper
#!/bin/sh
${INSTALL_ROOT}/lcg/libexec/lcg-info-dynamic-scheduler -c ${INSTALL_ROOT}/lcg/etc/lcg-info-dynamic-scheduler.conf
EOF

    chmod +x ${INSTALL_ROOT}/lcg/var/gip/plugin/lcg-info-dynamic-scheduler-wrapper

    if ( echo $CE_BATCH_SYS | egrep -qi 'pbs|torque' ); then

	cat <<EOF > $INSTALL_ROOT/lcg/etc/lcg-info-dynamic-scheduler.conf
[Main]
static_ldif_file: $INSTALL_ROOT/lcg/var/gip/ldif/static-file-CE.ldif
vomap :
EOF

	for vo in $VOS; do
	    vo_group=`users_getvogroup $vo`
	    if [ $vo_group ]; then
		echo "   $vo_group:$vo" >> $INSTALL_ROOT/lcg/etc/lcg-info-dynamic-scheduler.conf
	    fi
	done

	cat <<EOF >> $INSTALL_ROOT/lcg/etc/lcg-info-dynamic-scheduler.conf
module_search_path : ../lrms:../ett
[LRMS]
lrms_backend_cmd: $INSTALL_ROOT/lcg/libexec/lrmsinfo-pbs
[Scheduler]
vo_max_jobs_cmd: $vo_max_jobs_cmd
cycle_time : 0
EOF
    fi

    # Configure the provider for installed software

    if [ -f $INSTALL_ROOT/lcg/libexec/lcg-info-provider-software ]; then
	cat <<EOF > $INSTALL_ROOT/lcg/var/gip/provider/lcg-info-provider-software-wrapper
#!/bin/sh
$INSTALL_ROOT/lcg/libexec/lcg-info-provider-software -p $INSTALL_ROOT/edg/var/info  -c $CE_HOST
EOF
	chmod +x $INSTALL_ROOT/lcg/var/gip/provider/lcg-info-provider-software-wrapper
    fi

fi #endif for CE_HOST

if [ "$GRIDICE_SERVER_HOST" = "`hostname -f`" ]; then

    requires VOS SITE_NAME SITE_EMAIL

outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-gridice.conf

    cat <<EOF > $outfile

dn: GlueServiceUniqueID=${GRIDICE_SERVER_HOST}:2136
GlueServiceName: ${SITE_NAME}-gridice
GlueServiceType: gridice
GlueServiceVersion: 1.1.0
GlueServiceEndpoint: ldap://${GRIDICE_SERVER_HOST}:2136/mds-vo-name=local,o=grid
GlueServiceURI: unset
GlueServiceAccessPointURL: not_used
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

    for VO in $VOS; do
        echo "GlueServiceAccessControlRule: $VO" >> $outfile
	echo "GlueServiceOwner: $VO" >> $outfile
    done


FMON='--fmon=yes'

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
	$INSTALL_ROOT/lcg/etc/GlueService.template > \
	$INSTALL_ROOT/lcg/var/gip/ldif/static-file-GRIDICE.ldif

fi #endif for GRIDICE_SERVER_HOST

if ( echo "${NODE_TYPE_LIST}" | grep -w PX > /dev/null ); then

    requires GRID_TRUSTED_BROKERS SITE_EMAIL SITE_NAME

outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-px.conf

    cat << EOF > $outfile

dn: GlueServiceUniqueID=${PX_HOST}:7512
GlueServiceName: ${SITE_NAME}-myproxy
GlueServiceType: myproxy
GlueServiceVersion: 1.1.0
GlueServiceEndpoint: ${PX_HOST}:7512
GlueServiceURI: unset
GlueServiceAccessPointURL: myproxy://${PX_HOST}
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueServiceOwner: LCG
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

    split_quoted_variable $GRID_TRUSTED_BROKERS | while read x; do
        echo "GlueServiceAccessControlRule: $x" >> $outfile
    done

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
	$INSTALL_ROOT/lcg/etc/GlueService.template > \
	$INSTALL_ROOT/lcg/var/gip/ldif/static-file-PX.ldif

fi #endif for PX_HOST

if ( echo "${NODE_TYPE_LIST}" | grep -w RB > /dev/null ); then

    requires VOS SITE_EMAIL SITE_NAME

outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-rb.conf


    cat <<EOF > $outfile

dn: GlueServiceUniqueID=${RB_HOST}:7772
GlueServiceName: ${SITE_NAME}-rb
GlueServiceType: ResourceBroker
GlueServiceVersion: 1.2.0
GlueServiceEndpoint: ${RB_HOST}:7772
GlueServiceURI: unset
GlueServiceAccessPointURL: not_used
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

    for VO in $VOS; do
        echo "GlueServiceAccessControlRule: $VO" >> $outfile
	echo "GlueServiceOwner: $VO" >> $outfile
    done

    cat <<EOF >> $outfile
dn: GlueServiceDataKey=HeldJobs,GlueServiceUniqueID=gram://${RB_HOST}:7772
GlueServiceDataKey: HeldJobs
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://${RB_HOST}:7772

dn: GlueServiceDataKey=IdleJobs,GlueServiceUniqueID=gram://${RB_HOST}:7772
GlueServiceDataKey: IdleJobs
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://${RB_HOST}:7772

dn: GlueServiceDataKey=JobController,GlueServiceUniqueID=gram://${RB_HOST}:7772
GlueServiceDataKey: JobController
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://${RB_HOST}:7772

dn: GlueServiceDataKey=Jobs,GlueServiceUniqueID=gram://${RB_HOST}:7772
GlueServiceDataKey: Jobs
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://${RB_HOST}:7772

dn: GlueServiceDataKey=LogMonitor,GlueServiceUniqueID=gram://${RB_HOST}:7772
GlueServiceDataKey: LogMonitor
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://${RB_HOST}:7772

dn: GlueServiceDataKey=RunningJobs,GlueServiceUniqueID=gram://${RB_HOST}:7772
GlueServiceDataKey: RunningJobs
GlueServiceDataValue: 14
GlueChunkKey: GlueServiceUniqueID=gram://${RB_HOST}:7772

dn: GlueServiceDataKey=WorkloadManager,GlueServiceUniqueID=gram://${RB_HOST}:7772
GlueServiceDataKey: WorkloadManager
GlueServiceDataValue: 0
GlueChunkKey: GlueServiceUniqueID=gram://${RB_HOST}:7772

EOF

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
	$INSTALL_ROOT/lcg/etc/GlueService.template > \
	$INSTALL_ROOT/lcg/var/gip/ldif/static-file-RB.ldif

fi #endif for RB_HOST

if ( echo "${NODE_TYPE_LIST}" | grep '\<LFC' > /dev/null ); then

outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-lfc.conf
cat /dev/null > $outfile

    requires VOS SITE_EMAIL SITE_NAME BDII_HOST LFC_HOST

    if [ "$LFC_LOCAL" ]; then
	lfc_local=$LFC_LOCAL
    else
	# populate lfc_local with the VOS which are not set to be central
	unset lfc_local
	for i in $VOS; do
	    if ( ! echo $LFC_CENTRAL | grep -qw $i ); then
		lfc_local="$lfc_local $i"
	    fi
	done
    fi

    if [ "$LFC_CENTRAL" ]; then

	cat <<EOF >> $outfile
dn: GlueServiceUniqueID=http://${LFC_HOST}:8085/
GlueServiceName: ${SITE_NAME}-lfc-dli
GlueServiceType: data-location-interface
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: http://${LFC_HOST}:8085/
GlueServiceURI: http://${LFC_HOST}:8085/
GlueServiceAccessPointURL: http://${LFC_HOST}:8085/
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

	for VO in $LFC_CENTRAL; do
	    echo "GlueServiceOwner: $VO" >> $outfile
	    echo "GlueServiceAccessControlRule: $VO" >> $outfile
	done

	echo >> $outfile

	cat <<EOF >> $outfile
dn: GlueServiceUniqueID=${LFC_HOST}
GlueServiceName: ${SITE_NAME}-lfc
GlueServiceType: lcg-file-catalog
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: ${LFC_HOST}
GlueServiceURI: ${LFC_HOST}
GlueServiceAccessPointURL: ${LFC_HOST}
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

	for VO in $LFC_CENTRAL; do
	    echo "GlueServiceOwner: $VO" >> $outfile
	    echo "GlueServiceAccessControlRule: $VO" >> $outfile
	done

        echo >> $outfile

    fi

    if [ "$lfc_local" ]; then

        cat <<EOF >> $outfile
dn: GlueServiceUniqueID=http://${LFC_HOST}:8085/,o=local
GlueServiceName: ${SITE_NAME}-lfc-dli
GlueServiceType: local-data-location-interface
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: http://${LFC_HOST}:8085/
GlueServiceURI: http://${LFC_HOST}:8085/
GlueServiceAccessPointURL: http://${LFC_HOST}:8085/
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

        for VO in $lfc_local; do
            echo "GlueServiceOwner: $VO" >> $outfile
            echo "GlueServiceAccessControlRule: $VO" >> $outfile
        done

        echo >> $outfile

	cat <<EOF >> $outfile
dn: GlueServiceUniqueID=${LFC_HOST},o=local
GlueServiceName: ${SITE_NAME}-lfc
GlueServiceType: lcg-local-file-catalog
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: ${LFC_HOST}
GlueServiceURI: ${LFC_HOST}
GlueServiceAccessPointURL: ${LFC_HOST}
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

	for VO in $lfc_local; do
	    echo "GlueServiceOwner: $VO" >> $outfile
	    echo "GlueServiceAccessControlRule: $VO" >> $outfile
	done

    fi

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
	$INSTALL_ROOT/lcg/etc/GlueService.template > \
	$INSTALL_ROOT/lcg/var/gip/ldif/static-file-LFC.ldif

fi # end of LFC

if ( echo "${NODE_TYPE_LIST}" | egrep -q 'dcache|dpm_(mysql|oracle)' ); then

    outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-dse.conf

    cat <<EOF > $outfile

dn: GlueServiceUniqueID=httpg://${se_host}:8443/srm/managerv1
GlueServiceName: ${SITE_NAME}-srm
GlueServiceType: srm_v1
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: httpg://${se_host}:8443/srm/managerv1
GlueServiceURI: httpg://${se_host}:8443/srm/managerv1
GlueServiceAccessPointURL: httpg://${se_host}:8443/srm/managerv1
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueServiceOwner: LCG
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

    for VO in $VOS; do
	echo "GlueServiceAccessControlRule: $VO" >> $outfile
    done

    cat <<EOF >> $outfile
GlueServiceInformationServiceURL: \
MDS2GRIS:ldap://${BDII_HOST}:2170/mds-vo-name=${SITE_NAME},o=grid
GlueServiceStatus: OK
EOF

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
	$INSTALL_ROOT/lcg/etc/GlueService.template > \
	$INSTALL_ROOT/lcg/var/gip/ldif/static-file-dSE.ldif

fi # end of dcache,dpm

if ( echo "${NODE_TYPE_LIST}" | egrep -q 'SE_dpm_(mysql|oracle)' ); then

    # Install dynamic script pointing to gip plugin
    cat << EOF  > ${INSTALL_ROOT}/lcg/var/gip/plugin/lcg-info-dynamic-se
#! /bin/sh
${INSTALL_ROOT}/lcg/libexec/lcg-info-dynamic-dpm ${INSTALL_ROOT}/lcg/var/gip/ldif/static-file-SE.ldif
EOF

    chmod +x ${INSTALL_ROOT}/lcg/var/gip/plugin/lcg-info-dynamic-se

fi # end of dpm


if ( echo "${NODE_TYPE_LIST}" | grep '\<SE' > /dev/null ); then

outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-se.conf


    # dynamic_script points to the script generated by config_info_dynamic_se<se_type>
#    echo "">> $outfile
#    echo "dynamic_script=${INSTALL_ROOT}/lcg/libexec5A/lcg-info-dynamic-se" >> $outfile
#    echo >> $outfile        # Empty line to separate it form published info

    cat <<EOF > $outfile
dn: GlueSEUniqueID=${se_host}
GlueSEName: $SITE_NAME:${se_type}
GlueSEPort: 2811
GlueSESizeTotal: 0
GlueSESizeFree: 0
GlueSEArchitecture: multidisk
GlueInformationServiceURL: ldap://`hostname -f`:2135/mds-vo-name=local,o=grid
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}

dn: GlueSEAccessProtocolLocalID=gsiftp, GlueSEUniqueID=${se_host}
GlueSEAccessProtocolType: gsiftp
GlueSEAccessProtocolEndpoint: gsiftp://${se_host}
GlueSEAccessProtocolCapability: file transfer
GlueSEAccessProtocolVersion: 1.0.0
GlueSEAccessProtocolPort: 2811
GlueSEAccessProtocolSupportedSecurity: GSI
GlueChunkKey: GlueSEUniqueID=${se_host}

dn: GlueSEAccessProtocolLocalID=rfio, GlueSEUniqueID=${se_host}
GlueSEAccessProtocolType: rfio
GlueSEAccessProtocolEndpoint:
GlueSEAccessProtocolCapability:
GlueSEAccessProtocolVersion: 1.0.0
GlueSEAccessProtocolPort: 5001
GlueSEAccessProtocolSupportedSecurity: RFIO
GlueChunkKey: GlueSEUniqueID=${se_host}

dn: GlueSEControlProtocolLocalID=$control_protocol, GlueSEUniqueID=${se_host}
GlueSEControlProtocolType: $control_protocol
GlueSEControlProtocolEndpoint: $control_endpoint
GlueSEControlProtocolCapability:
GlueSEControlProtocolVersion: 1.0.0
GlueChunkKey: GlueSEUniqueID=${se_host}
EOF

for VO in $VOS; do

    if ( echo "${NODE_TYPE_LIST}" | grep SE_dpm > /dev/null ); then
	storage_path="/dpm/`hostname -d`/home/${VO}"
	storage_root="${VO}:${storage_path}"
    elif ( echo "${NODE_TYPE_LIST}" | grep SE_dcache > /dev/null ); then
	storage_path="/pnfs/`hostname -d`/data/${VO}"
	storage_root="${VO}:${storage_path}"
    else
	storage_path=$( eval echo '$'VO_`echo ${VO} | tr '[:lower:]' '[:upper:]'`_STORAGE_DIR )
	storage_root="${VO}:${storage_path#${CLASSIC_STORAGE_DIR}}"
    fi

    cat <<EOF >> $outfile

dn: GlueSALocalID=$VO,GlueSEUniqueID=${se_host}
GlueSARoot: $storage_root
GlueSAPath: $storage_path
GlueSAType: permanent
GlueSAPolicyMaxFileSize: 10000
GlueSAPolicyMinFileSize: 1
GlueSAPolicyMaxData: 100
GlueSAPolicyMaxNumFiles: 10
GlueSAPolicyMaxPinDuration: 10
GlueSAPolicyQuota: 0
GlueSAPolicyFileLifeTime: permanent
GlueSAStateAvailableSpace: 1
GlueSAStateUsedSpace: 1
GlueSAAccessControlBaseRule: $VO
GlueChunkKey: GlueSEUniqueID=${se_host}
EOF

done

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
	$INSTALL_ROOT/lcg/etc/GlueSE.template > \
	$INSTALL_ROOT/lcg/var/gip/ldif/static-file-SE.ldif

fi #endif for SE_HOST

if ( echo "${NODE_TYPE_LIST}" | grep -w VOBOX > /dev/null ); then

outfile=$INSTALL_ROOT/lcg/var/gip/lcg-info-static-vobox.conf


    for x in VOS SITE_EMAIL SITE_NAME VOBOX_PORT; do
        if [ "x`eval echo '$'$x`" = "x" ]; then
            echo "\$$x not set"
            return 1
        fi
    done

    for VO in $VOS; do
        dir=${INSTALL_ROOT}/edg/var/info/$VO
        mkdir -p $dir
	f=$dir/$VO.list
	[ -f $f ] || touch $f
        # work out the sgm user for this VO
        sgmuser=`users_getsgmuser $VO`
	sgmgroup=`id -g $sgmuser`
	chown -R ${sgmuser}:${sgmgroup} $dir
	chmod -R go-w $dir
    done

    cat <<EOF > $outfile
dn: GlueServiceUniqueID=gsissh://${VOBOX_HOST}:${VOBOX_PORT}
GlueServiceName: ${SITE_NAME}-vobox
GlueServiceType: VOBOX
GlueServiceVersion: 1.0.0
GlueServiceEndpoint: gsissh://${VOBOX_HOST}:${VOBOX_PORT}
GlueServiceURI: unset
GlueServiceAccessPointURL: gsissh://${VOBOX_HOST}:${VOBOX_PORT}
GlueServiceStatus: OK
GlueServiceStatusInfo: No Problems
GlueServiceWSDL: unset
GlueServiceSemantics: unset
GlueServiceStartTime: 1970-01-01T00:00:00Z
GlueServiceOwner: LCG
GlueForeignKey: GlueSiteUniqueID=${SITE_NAME}
EOF

    for VO in $VOS; do
        echo "GlueServiceAccessControlRule: $VO" >> $outfile
    done

    echo >> $outfile

    $INSTALL_ROOT/lcg/sbin/lcg-info-static-create -c $outfile -t \
	$INSTALL_ROOT/lcg/etc/GlueService.template > \
	$INSTALL_ROOT/lcg/var/gip/ldif/static-file-VOBOX.ldif

fi #endif for VOBOX_HOST


cat << EOT > $INSTALL_ROOT/globus/libexec/edg.info
#!/bin/bash
#
# info-globus-ldif.sh
#
#Configures information providers for MDS
#
cat << EOF

dn: Mds-Vo-name=local,o=grid
objectclass: GlobusTop
objectclass: GlobusActiveObject
objectclass: GlobusActiveSearch
type: exec
path: $INSTALL_ROOT/lcg/libexec/
base: lcg-info-wrapper
args:
cachetime: 60
timelimit: 20
sizelimit: 250

EOF

EOT

chmod a+x $INSTALL_ROOT/globus/libexec/edg.info

if [ ! -d "$INSTALL_ROOT/lcg/libexec" ]; then
    mkdir -p $INSTALL_ROOT/lcg/libexec
fi

cat << EOF > $INSTALL_ROOT/lcg/libexec/lcg-info-wrapper
#!/bin/sh

export LANG=C
$INSTALL_ROOT/lcg/bin/lcg-info-generic $INSTALL_ROOT/lcg/etc/lcg-info-generic.conf

EOF

chmod a+x $INSTALL_ROOT/lcg/libexec/lcg-info-wrapper

cat << EOT > $INSTALL_ROOT/globus/libexec/edg.schemalist
#!/bin/bash

cat <<EOF
${INSTALL_ROOT}/globus/etc/openldap/schema/core.schema
${INSTALL_ROOT}/glue/schema/ldap/Glue-CORE.schema
${INSTALL_ROOT}/glue/schema/ldap/Glue-CE.schema
${INSTALL_ROOT}/glue/schema/ldap/Glue-CESEBind.schema
${INSTALL_ROOT}/glue/schema/ldap/Glue-SE.schema
EOF

EOT

chmod a+x $INSTALL_ROOT/globus/libexec/edg.schemalist

# Configure gin
if ( ! echo "${NODE_TYPE_LIST}" | egrep -q '^UI$|^WN[A-Za-z_]*$'  ); then
    if [ ! -d ${INSTALL_ROOT}/glite/var/rgma/.certs ]; then
	mkdir -p ${INSTALL_ROOT}/glite/var/rgma/.certs
    fi

    cp -pf /etc/grid-security/hostcert.pem /etc/grid-security/hostkey.pem \
	${INSTALL_ROOT}/glite/var/rgma/.certs
    chown rgma:rgma ${INSTALL_ROOT}/glite/var/rgma/.certs/host*

    (
	egrep -v 'sslCertFile|sslKey' \
	    ${INSTALL_ROOT}/glite/etc/rgma/ClientAuthentication.props
	echo "sslCertFile=${INSTALL_ROOT}/glite/var/rgma/.certs/hostcert.pem"
	echo "sslKey=${INSTALL_ROOT}/glite/var/rgma/.certs/hostkey.pem"
    ) > /tmp/props.$$
    mv -f /tmp/props.$$ ${INSTALL_ROOT}/glite/etc/rgma/ClientAuthentication.props

    #Turn on Gin for the GIP and maybe FMON
    export RGMA_HOME=${INSTALL_ROOT}/glite
    ${RGMA_HOME}/bin/rgma-gin-config --gip=yes ${FMON}
    /sbin/chkconfig rgma-gin on
    /etc/rc.d/init.d/rgma-gin restart 2>${YAIM_LOG}
fi


return 0
}

config_globus

config_globus(){
# $Id: config_globus,v 1.34 2006/01/06 13:45:51 maart Exp $


requires CE_HOST PX_HOST RB_HOST SITE_NAME

GLOBUS_MDS=no
GLOBUS_GRIDFTP=no
GLOBUS_GATEKEEPER=no

if ( echo "${NODE_TYPE_LIST}" | grep '\<'CE > /dev/null ); then
    GLOBUS_MDS=yes
    GLOBUS_GRIDFTP=yes
    GLOBUS_GATEKEEPER=yes
fi
if ( echo "${NODE_TYPE_LIST}" | grep VOBOX > /dev/null ); then
    GLOBUS_MDS=yes
    if ! ( echo "${NODE_TYPE_LIST}" | grep '\<'RB > /dev/null ); then
	GLOBUS_GRIDFTP=yes
    fi
fi
if ( echo "${NODE_TYPE_LIST}" | grep '\<'SE > /dev/null ); then
    GLOBUS_MDS=yes
    GLOBUS_GRIDFTP=yes
fi
# DPM has its own ftp server
if ( echo "${NODE_TYPE_LIST}" | grep SE_dpm > /dev/null ); then
    GLOBUS_GRIDFTP=no
fi
if ( echo "${NODE_TYPE_LIST}" | grep '\<'PX > /dev/null ); then
    GLOBUS_MDS=yes
fi
if ( echo "${NODE_TYPE_LIST}" | grep '\<'RB > /dev/null ); then
    GLOBUS_MDS=yes
fi
if ( echo "${NODE_TYPE_LIST}" | grep '\<'LFC > /dev/null ); then
    GLOBUS_MDS=yes
fi
if ( echo "${NODE_TYPE_LIST}" | grep SE_dpm > /dev/null ); then
    X509_DPM1="x509_user_cert=/home/edginfo/.globus/usercert.pem"
    X509_DPM2="x509_user_key=/home/edginfo/.globus/userkey.pem"
else
    X509_DPM1=""
    X509_DPM2=""
fi
if [ "$GRIDICE_SERVER_HOST" = "`hostname -f`" ]; then
    GLOBUS_MDS=yes
fi

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

cat <<EOF > /etc/globus.conf
########################################################################
#
# Globus configuraton.
#
########################################################################
[common]
GLOBUS_LOCATION=${INSTALL_ROOT}/globus
globus_flavor_name=gcc32dbg
x509_user_cert=/etc/grid-security/hostcert.pem
x509_user_key=/etc/grid-security/hostkey.pem
gridmap=/etc/grid-security/grid-mapfile
gridmapdir=/etc/grid-security/gridmapdir/

EOF

if [ "$GLOBUS_MDS" = "yes" ]; then
cat <<EOF >> /etc/globus.conf

[mds]
globus_flavor_name=gcc32dbgpthr
user=edginfo
$X509_DPM1
$X509_DPM2

[mds/gris/provider/edg]

EOF

cat <<EOF >> /etc/globus.conf
[mds/gris/registration/site]
regname=$SITE_NAME
reghn=$CE_HOST

EOF
else
echo "[mds]"  >> /etc/globus.conf

fi

if [ "$GLOBUS_GRIDFTP" = "yes" ]; then

    cat <<EOF >> /etc/globus.conf
[gridftp]
log=/var/log/globus-gridftp.log
EOF

    cat <<EOF > /etc/logrotate.d/gridftp
/var/log/globus-gridftp.log /var/log/gridftp-lcas_lcmaps.log {
missingok
daily
compress
rotate 31
create 0644 root root
sharedscripts
} 
EOF

else
    echo "[gridftp]"  >> /etc/globus.conf
fi


if [ "$GLOBUS_GATEKEEPER" = "yes" ]; then

if [ "x`grep globus-gatekeeper /etc/services`" = "x" ]; then
    echo "globus-gatekeeper   2119/tcp" >> /etc/services
fi

cat <<EOF > /etc/logrotate.d/globus-gatekeeper
/var/log/globus-gatekeeper.log {
nocompress
copy
rotate 1
prerotate
killall -s USR1 -e /opt/edg/sbin/edg-gatekeeper
endscript
postrotate
find /var/log/globus-gatekeeper.log.20????????????.*[0-9] -mtime +7 -exec gzip {} \;
endscript
} 
EOF

cat <<EOF >> /etc/globus.conf
[gatekeeper]

default_jobmanager=fork
job_manager_path=\$GLOBUS_LOCATION/libexec
globus_gatekeeper=${INSTALL_ROOT}/edg/sbin/edg-gatekeeper
extra_options=\"-lcas_db_file lcas.db -lcas_etc_dir ${INSTALL_ROOT}/edg/etc/lcas/ -lcasmod_dir \
${INSTALL_ROOT}/edg/lib/lcas/ -lcmaps_db_file lcmaps.db -lcmaps_etc_dir ${INSTALL_ROOT}/edg/etc/lcmaps -lcmapsmod_dir ${INSTALL_ROOT}/edg/lib/lcmaps\"
logfile=/var/log/globus-gatekeeper.log
jobmanagers="fork ${JOB_MANAGER}"

[gatekeeper/fork]
type=fork
job_manager=globus-job-manager

[gatekeeper/${JOB_MANAGER}]
type=${JOB_MANAGER}

EOF
else
cat <<EOF >> /etc/globus.conf
[gatekeeper]
default_jobmanager=fork
job_manager_path=${GLOBUS_LOCATION}/libexec
 
jobmanagers="fork "
 
[gatekeeper/fork]
type=fork
job_manager=globus-job-manager
EOF
fi

$INSTALL_ROOT/globus/sbin/globus-initialization.sh 2>> $YAIM_LOG

if [ "$GLOBUS_MDS" = "yes" ]; then
    /sbin/chkconfig globus-mds on
    /sbin/service globus-mds stop
    /sbin/service globus-mds start
fi
if [ "$GLOBUS_GATEKEEPER" = "yes" ]; then
    /sbin/chkconfig globus-gatekeeper on
    /sbin/service globus-gatekeeper stop
    /sbin/service globus-gatekeeper start
fi
if [ "$GLOBUS_GRIDFTP" = "yes" ]; then
    /sbin/chkconfig globus-gridftp on
    /sbin/service globus-gridftp stop
    /sbin/service globus-gridftp start
    /sbin/chkconfig lcg-mon-gridftp on
    /etc/rc.d/init.d/lcg-mon-gridftp restart
fi

return 0
}

config_lcgenv

config_lcgenv() {

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

if !( echo "${NODE_TYPE_LIST}" | grep TAR > /dev/null ); then
	LCG_ENV_LOC=/etc/profile.d
else
	LCG_ENV_LOC=${INSTALL_ROOT}/etc/env.d
fi

requires BDII_HOST SITE_NAME CE_HOST

if ( ! echo "${NODE_TYPE_LIST}" | grep -q UI ); then
    requires VOS VO__SW_DIR SE_LIST
fi

default_se="${SE_LIST%% *}"

if [ "$default_se" ]; then
    for VO in `echo $VOS | tr '[:lower:]' '[:upper:]'`; do
	if [ "x`eval echo '$'VO_${VO}_DEFAULT_SE`" = "x" ]; then
	    eval VO_${VO}_DEFAULT_SE=$default_se
	fi
    done
fi

########## sh ##########
cat << EOF > ${LCG_ENV_LOC}/lcgenv.sh 
#!/bin/sh
if test "x\${LCG_ENV_SET+x}" = x; then
export LCG_GFAL_INFOSYS=$BDII_HOST:2170
EOF

if [ "$PX_HOST" ]; then
echo "export MYPROXY_SERVER=$PX_HOST" >> ${LCG_ENV_LOC}/lcgenv.sh
fi

if ( echo "${NODE_TYPE_LIST}" | egrep -q 'WN|VOBOX' ); then
    if [ "$SITE_NAME" ]; then
	echo "export SITE_NAME=$SITE_NAME" >> ${LCG_ENV_LOC}/lcgenv.sh
    fi

    if [ "$CE_HOST" ]; then
	echo "export SITE_GIIS_URL=$CE_HOST" >> ${LCG_ENV_LOC}/lcgenv.sh
    fi
fi

if [ -d ${INSTALL_ROOT}/d-cache/srm/bin ]; then
    echo export PATH="\${PATH}:${INSTALL_ROOT}/d-cache/srm/bin:${INSTALL_ROOT}/d-cache/dcap/bin" >> ${LCG_ENV_LOC}/lcgenv.sh
fi

if [ -d ${INSTALL_ROOT}/d-cache/dcap/lib ]; then
    echo export LD_LIBRARY_PATH=\${LD_LIBRARY_PATH}:${INSTALL_ROOT}/d-cache/dcap/lib >> ${LCG_ENV_LOC}/lcgenv.sh
fi

if [ -d ${INSTALL_ROOT}/d-cache/srm ]; then
    echo export SRM_PATH=${INSTALL_ROOT}/d-cache/srm >> ${LCG_ENV_LOC}/lcgenv.sh
fi

if [ "$EDG_WL_SCRATCH" ]; then
    echo "export EDG_WL_SCRATCH=$EDG_WL_SCRATCH"  >> ${LCG_ENV_LOC}/lcgenv.sh
fi 

for VO in `echo $VOS | tr '[:lower:]' '[:upper:]'`; do

    default_se=`eval echo '$'VO_${VO}_DEFAULT_SE`
    if [ "$default_se" ]; then
	echo "export VO_${VO}_DEFAULT_SE=$default_se" >> ${LCG_ENV_LOC}/lcgenv.sh
    fi

    if ( ! echo "${NODE_TYPE_LIST}" | grep -q UI ); then
	sw_dir=`eval echo '$'VO_${VO}_SW_DIR`
	if [ "$sw_dir" ]; then
	    echo "export VO_${VO}_SW_DIR=$sw_dir" >> ${LCG_ENV_LOC}/lcgenv.sh
	fi
    fi

done

if [ "$VOBOX_HOST" ]; then
   requires GSSKLOG 	
   if  [ "${GSSKLOG}x" == "yesx" ]; then	
      requires GSSKLOG_SERVER	
      echo "export GSSKLOG_SERVER=$GSSKLOG_SERVER" >> ${LCG_ENV_LOC}/lcgenv.sh
   fi	
fi

if [ "${DPM_HOST}" ]; then
    echo "export DPNS_HOST=${DPM_HOST}" >> ${LCG_ENV_LOC}/lcgenv.sh
    echo "export DPM_HOST=${DPM_HOST}" >> ${LCG_ENV_LOC}/lcgenv.sh
fi

if [ "$GLOBUS_TCP_PORT_RANGE" ]; then
    echo "export MYPROXY_TCP_PORT_RANGE=\"${GLOBUS_TCP_PORT_RANGE/ /,}\"" >> ${LCG_ENV_LOC}/lcgenv.sh
fi

if ( echo $NODE_TYPE_LIST | egrep -q UI ); then
    cat << EOF >> ${LCG_ENV_LOC}/lcgenv.sh
if [ "x\$X509_USER_PROXY" = "x" ]; then
    export X509_USER_PROXY=/tmp/x509up_u\$(id -u)
fi
EOF
fi

echo fi >> ${LCG_ENV_LOC}/lcgenv.sh
########## sh ##########


########## csh ##########
cat << EOF > ${LCG_ENV_LOC}/lcgenv.csh
#!/bin/csh
if ( ! \$?LCG_ENV_SET ) then
setenv LCG_GFAL_INFOSYS $BDII_HOST:2170
EOF

if [ "$PX_HOST" ]; then
echo "setenv MYPROXY_SERVER $PX_HOST" >>  ${LCG_ENV_LOC}/lcgenv.csh
fi

if ( echo "${NODE_TYPE_LIST}" | egrep -q 'WN|VOBOX' ); then
    if [ "$SITE_NAME" ]; then
	echo "setenv SITE_NAME $SITE_NAME" >>  ${LCG_ENV_LOC}/lcgenv.csh
    fi

    if [ "$CE_HOST" ]; then
	echo "setenv SITE_GIIS_URL $CE_HOST" >>  ${LCG_ENV_LOC}/lcgenv.csh
    fi
fi

if [ -d ${INSTALL_ROOT}/d-cache/srm/bin ]; then
    echo setenv PATH "\${PATH}:${INSTALL_ROOT}/d-cache/srm/bin:${INSTALL_ROOT}/d-cache/dcap/bin" >> ${LCG_ENV_LOC}/lcgenv.csh
fi

if [ -d ${INSTALL_ROOT}/d-cache/dcap/lib ]; then
    echo setenv LD_LIBRARY_PATH \${LD_LIBRARY_PATH}:${INSTALL_ROOT}/d-cache/dcap/lib >> ${LCG_ENV_LOC}/lcgenv.csh
fi

if [ -d ${INSTALL_ROOT}/d-cache/srm ]; then
    echo setenv SRM_PATH ${INSTALL_ROOT}/d-cache/srm >> ${LCG_ENV_LOC}/lcgenv.csh
fi

if [ "$EDG_WL_SCRATCH" ]; then
    echo "setenv EDG_WL_SCRATCH $EDG_WL_SCRATCH"  >> ${LCG_ENV_LOC}/lcgenv.csh
fi                                                                                

for VO in `echo $VOS | tr '[:lower:]' '[:upper:]'`; do

    default_se=`eval echo '$'VO_${VO}_DEFAULT_SE`
    if [ "$default_se" ]; then
	echo "setenv VO_${VO}_DEFAULT_SE $default_se" >> ${LCG_ENV_LOC}/lcgenv.csh
    fi

    if ( ! echo "${NODE_TYPE_LIST}" | grep -q UI ); then
	sw_dir=`eval echo '$'VO_${VO}_SW_DIR`
	if [ "$sw_dir" ]; then
	    echo "setenv VO_${VO}_SW_DIR $sw_dir" >> ${LCG_ENV_LOC}/lcgenv.csh
	fi
    fi

done

if [ "$VOBOX_HOST" ]; then
   requires GSSKLOG	
   if [ "${GSSKLOG}x" == "yesx" ]; then	
   requires GSSKLOG_SERVER
      echo "setenv GSSKLOG_SERVER $GSSKLOG_SERVER" >> ${LCG_ENV_LOC}/lcgenv.csh
   fi	
fi


if [ "${DPM_HOST}" ]; then
    echo "setenv DPNS_HOST ${DPM_HOST}" >> ${LCG_ENV_LOC}/lcgenv.csh
    echo "setenv DPM_HOST ${DPM_HOST}" >> ${LCG_ENV_LOC}/lcgenv.csh
fi

if [ "$GLOBUS_TCP_PORT_RANGE" ]; then
    echo "setenv MYPROXY_TCP_PORT_RANGE \"${GLOBUS_TCP_PORT_RANGE/ /,}\"" >> ${LCG_ENV_LOC}/lcgenv.csh
fi

if ( echo $NODE_TYPE_LIST | egrep -q UI ); then
    cat << EOF >> ${LCG_ENV_LOC}/lcgenv.csh
if ( ! \$?X509_USER_PROXY ) then
   setenv X509_USER_PROXY /tmp/x509up_u\`id -u\`
endif
EOF
fi

echo endif >> ${LCG_ENV_LOC}/lcgenv.csh
########## csh ##########

chmod a+xr ${LCG_ENV_LOC}/lcgenv.csh
chmod a+xr ${LCG_ENV_LOC}/lcgenv.sh

return 0
}

config_DPM_rfio

config_DPM_rfio() {
# $Id: config_DPM_rfio,v 1.13 2006/01/10 12:37:03 okeeble Exp $

## Requires: DPM_HOST

requires DPM_HOST

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

if [ "x`grep rfio /etc/services | grep tcp`" = "x"  ]; then
    echo "rfio     5001/tcp" >> /etc/services
fi

if [ "x`grep rfio /etc/services | grep udp`" = "x"  ]; then
    echo "rfio     5001/udp" >> /etc/services
fi

touch /etc/shift.conf

function add_to_shift () {
    trust="$1"
    host="$2"
    line=`grep "^$trust" /etc/shift.conf`
    if [ -z "$line" ]; then
	echo "$trust $host" >> /etc/shift.conf
    elif ( ! echo $line | egrep -q "$host[^.]|$host$" ); then
	ex /etc/shift.conf <<EOF
/^$trust/s/$/ $host/
.
wq
EOF
    fi
    return 0
}

for i in 'RFIOD TRUST' 'RFIOD WTRUST' 'RFIOD RTRUST' 'RFIOD XTRUST' 'RFIOD FTRUST'; do
    add_to_shift "$i" ${DPM_HOST%%.*}
    add_to_shift "$i" ${DPM_HOST}
done

if ( echo $NODE_TYPE_LIST | grep -qw SE_dpm_mysql ); then
    for i in $DPMPOOL_NODES; do
	add_to_shift 'DPM TRUST' ${i%%:*}
	add_to_shift 'DPM TRUST' ${i%%.*}
	add_to_shift 'DPNS TRUST' ${i%%:*}
	add_to_shift 'DPNS TRUST' ${i%%.*}
    done
fi

grep -v DPNS_HOST /etc/sysconfig/rfiod.templ > /etc/sysconfig/rfiod
echo "export DPNS_HOST=${DPM_HOST}" >> /etc/sysconfig/rfiod
/sbin/service rfiod stop
sleep 1s
/sbin/service rfiod start
/sbin/chkconfig rfiod on

return 0
}

config_DPM_user

function config_DPM_user () {

requires USERS_CONF

if ( ! id dpmmgr > /dev/null 2>&1 ); then
    dpmuid=`awk -F: '$6=="dpm"{print $1}' $USERS_CONF`
    dpmgid=`awk -F: '$6=="dpm"{print $3}' $USERS_CONF`
    if [ "$dpmuid" -a "$dpmgid" ]; then
	groupadd -g $dpmgid dpmmgr 2>/dev/null
	useradd -c "DPM Manager" -m -d /home/dpmmgr -s /bin/tcsh -u $dpmuid -g $dpmgid dpmmgr 2>/dev/null
    else
	echo "Unable to find an entry for the dpmmgr in $USERS_CONF"
	echo "Please add an entry with the flag 'dpm'"
	return 1
    fi
fi

return 0

}

config_DPM_mgr

config_DPM_mgr(){
# $Id: config_DPM_mgr,v 1.7 2006/01/10 12:37:03 okeeble Exp $

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

if [ ! -d /etc/grid-security/dpmmgr ]; then
    mkdir /etc/grid-security/dpmmgr
fi

cp -pf /etc/grid-security/hostcert.pem /etc/grid-security/dpmmgr
cp -pf /etc/grid-security/hostkey.pem /etc/grid-security/dpmmgr
mv -f /etc/grid-security/dpmmgr/hostcert.pem /etc/grid-security/dpmmgr/dpmcert.pem
mv -f /etc/grid-security/dpmmgr/hostkey.pem /etc/grid-security/dpmmgr/dpmkey.pem

chown -R dpmmgr:dpmmgr /etc/grid-security/dpmmgr
chown root:dpmmgr /etc/grid-security/gridmapdir
chmod 775 /etc/grid-security/gridmapdir


## This is required to allow special user edginfo 
## to get a host cert (to be authenticated
## to allow it to use the dpm-qryconf command to fetch
## storage global info from the DPM server itself
mkdir -p ~edginfo/.globus
chown edginfo:edginfo ~edginfo/.globus
if [ -f /etc/grid-security/hostkey.pem ]; then
    cp -p /etc/grid-security/hos* ~edginfo/.globus/
    cd ~edginfo/.globus
    mv hostcert.pem usercert.pem
    mv hostkey.pem  userkey.pem
    chown edginfo:edginfo user*
fi

return 0

}

config_DPM_oracle

config_DPM_oracle(){

# $Id: config_DPM_oracle,v 1.7 2006/01/10 12:37:03 okeeble Exp $

## Requires: ORACLE_SERVER DPMUSER_PWD VOS DPMPOOL DPMDATA DPMFSIZE DPM_HOST DPMMGR

INSTALL_ROOT=${INSTALL_ROOT:-/opt}

requires ORACLE_SERVER DPMUSER_PWD VOS DPMPOOL DPMDATA DPMFSIZE DPM_HOST DPMMGR

DPMCONFIG=${INSTALL_ROOT}/lcg/etc/DPMCONFIG 

export ORACLE_CERN=/afs/cern.ch/project/oracle
source $ORACLE_CERN/script/setoraenv.sh -s 10103
export TWO_TASK=$ORACLE_SERVER
sqlplus $DPMMGR/$DPMUSER_PWD < ${INSTALL_ROOT}/lcg/share/DPM/create_dpns_tables_oracle.sql
sqlplus $DPMMGR/$DPMUSER_PWD < ${INSTALL_ROOT}/lcg/share/DPM/create_dpm_tables_oracle.sql


cat << EOC > $DPMCONFIG
$DPMMGR/$DPMUSER_PWD@$ORACLE_SERVER 
EOC
chown dpmmgr:dpmmgr $DPMCONFIG
chmod 600             $DPMCONFIG



	return 0

}

config_DPM_gsiftp

function config_DPM_gsiftp () {

requires DPM_HOST

if [ ! -f /etc/sysconfig/dpm-gsiftp.templ ]; then
    echo "Cannot find /etc/sysconfig/dpm-gsiftp.templ"
    exit 1
fi

sed -e "s/<DPNS_hostname>/${DPM_HOST}/"  -e "s/<DPM_hostname>/${DPM_HOST}/" /etc/sysconfig/dpm-gsiftp.templ > /etc/sysconfig/dpm-gsiftp

/sbin/service dpm-gsiftp start

return 0

}

config_sedpm

config_sedpm () {
# $Id: config_sedpm,v 1.24 2006/01/10 12:37:03 okeeble Exp $

## Requires: $MY_DOMAIN $VOS $USERS_CONF $DPM_HOST $SITE_EMAIL 

requires MY_DOMAIN VOS USERS_CONF DPM_HOST SITE_EMAIL VOS

DPMCONFIG=${INSTALL_ROOT}/lcg/etc/DPMCONFIG 
INSTALL_ROOT=${INSTALL_ROOT:-/opt}		

check_users_conf_format

for x in dpns dpm srmv1 srmv2; do
	echo
	echo ' >>>>>>>>>>>>>>>>>>>>>>>>>>>>>'
	xd=$x;
	if [ "$x" = "dpns" ]; then
		xd="dpnsdaemon"
	fi
	grep -v -E 'DPNS_HOST|DPM_HOST|SRMV2CONFIGFILE|DPMCONFIGFILE' /etc/sysconfig/${xd}.templ > /etc/sysconfig/$xd
	echo "export DPNS_HOST=${DPM_HOST}" >> /etc/sysconfig/$xd
	echo "export DPM_HOST=${DPM_HOST}"  >> /etc/sysconfig/$xd
	if [ "$x" = "dpns" ]; then
		echo NSCONFIGFILE=$DPMCONFIG >> /etc/sysconfig/$xd
	else
		echo DPMCONFIGFILE=$DPMCONFIG >> /etc/sysconfig/$xd
	fi
       	/sbin/service $xd stop
	pid="X"
	while [ "x$pid" != "x" ]; do
		sleep 1s
		pid=`ps h -o pid -C $xd | awk '{print $1}'`
		echo " stopping: $xd $pid "
	done
	echo
	echo '=================================='
	ps -wedf|grep -E 'dpmm|rfiod'
	echo '=================================='
	echo
       	/sbin/service $xd start
       	/sbin/chkconfig $xd on
	sleep 1s
	tail -20 /var/log/${x}/log
	echo ' >>>>>>>>>>>>>>>>>>>>>>>>>>>>>'
	echo
done

export DPNS_HOST=$DPM_HOST
export DPM_HOST=$DPM_HOST

if [ ! -d $DPMDATA ]; then
	mkdir -p $DPMDATA
fi
chown dpmmgr:dpmmgr $DPMDATA

${INSTALL_ROOT}/lcg/bin/dpm-addpool --poolname $DPMPOOL --def_filesize $DPMFSIZE
${INSTALL_ROOT}/lcg/bin/dpm-addfs   --poolname $DPMPOOL --server $DPM_HOST --fs $DPMDATA

${INSTALL_ROOT}/lcg/bin/dpm-qryconf

if ( ! ${INSTALL_ROOT}/lcg/bin/dpns-ls /dpm > /dev/null 2>&1 ); then
    ${INSTALL_ROOT}/lcg/bin/dpns-mkdir /dpm
fi

if ( ! ${INSTALL_ROOT}/lcg/bin/dpns-ls /dpm/${MY_DOMAIN} > /dev/null 2>&1 ); then
    ${INSTALL_ROOT}/lcg/bin/dpns-mkdir -m 755 -p /dpm/${MY_DOMAIN}
fi

if ( ! ${INSTALL_ROOT}/lcg/bin/dpns-ls /dpm/${MY_DOMAIN}/home > /dev/null 2>&1 ); then
    ${INSTALL_ROOT}/lcg/bin/dpns-mkdir -m 755 -p /dpm/${MY_DOMAIN}/home
fi

${INSTALL_ROOT}/lcg/bin/dpns-chmod 775 /dpm
${INSTALL_ROOT}/lcg/bin/dpns-chmod 775 /dpm/${MY_DOMAIN}
${INSTALL_ROOT}/lcg/bin/dpns-chmod 775 /dpm/${MY_DOMAIN}/home

${INSTALL_ROOT}/lcg/bin/dpns-setacl -m d:u::7,d:g::7,d:o:5 /dpm
${INSTALL_ROOT}/lcg/bin/dpns-setacl -m d:u::7,d:g::7,d:o:5 /dpm/${MY_DOMAIN}
${INSTALL_ROOT}/lcg/bin/dpns-setacl -m d:u::7,d:g::7,d:o:5 /dpm/${MY_DOMAIN}/home

for vo in `echo $VOS | tr '[:upper:]' '[:lower:]'`; do
    vo_group=`users_getvogroup $vo`
    if ( ! ${INSTALL_ROOT}/lcg/bin/dpns-ls /dpm/${MY_DOMAIN}/home/$vo > /dev/null 2>&1 ); then
            ${INSTALL_ROOT}/lcg/bin/dpns-mkdir -m 775 /dpm/${MY_DOMAIN}/home/$vo
    fi
    ${INSTALL_ROOT}/lcg/bin/dpns-chmod 775 /dpm/${MY_DOMAIN}/home/$vo
    ${INSTALL_ROOT}/lcg/bin/dpns-chown root:$vo_group /dpm/${MY_DOMAIN}/home/$vo
    ${INSTALL_ROOT}/lcg/bin/dpns-setacl -m d:u::7,d:g::7,d:o:5 /dpm/${MY_DOMAIN}/home/$vo
done

# Setup hostproxy for RGMA to run GIP plugin
rgma_user=rgma

job="8 * * * * ${INSTALL_ROOT}/globus/bin/grid-proxy-init -q \
-cert /etc/grid-security/hostcert.pem \
-key /etc/grid-security/hostkey.pem -out ${INSTALL_ROOT}/lcg/hostproxy.\$$ && \
chown $rgma_user ${INSTALL_ROOT}/lcg/hostproxy.\$$ && \
mv -f ${INSTALL_ROOT}/lcg/hostproxy.\$$ ${INSTALL_ROOT}/lcg/hostproxy.$rgma_user"

cron_job rgma-proxy root "$job"

echo "$job" | sed 's|[^/]*||' | sh

return 0

}

About this document ...

SE_dpm_oracle Generic Configuration Reference

This document was generated using the LaTeX2HTML translator Version 2002 (1.62)

The command line arguments were:
latex2html -split 0 -html_version 4.0 -no_navigation -address 'GRID deployment' SE_dpm_oracle.drv_html

The translation was initiated by Oliver KEEBLE on 2006-01-16

GRID deployment

node/daemon	MDS	GridFTP	Gatekeeper
CE	yes	yes	yes
VOBOX	yes	yes	yes
SE_*	yes	yes	no
SE_dpm	yes	no	no
PX	yes	no	no
RB	yes	no	no
LFC	yes	no	no
GridICE	yes	no	no