gLite > gLite 3.1 > glite-TORQUE_client > Update to glite-TORQUE_client 3.1.1-0  
 
 

 

 

gLite 3.1

glite-TORQUE_client - Update to version 3.1.1-0


Date 01.09.2008
Priority High

Description



This is the initial release of the Torque client on SLC4/x86_64. Note that this package is only supported in combination with a installed glite-WN. Please check the generic installation guide (here) of how to install glite-WN for 64Bit. For the reconfiguration, please run run yaim.

For the service restart both ways work:
  • /etc/init.d/pbs_mom restart
  • reboot


Please also have a look at the list of known issues.

Updated rpms

Name Version Full RPM name Description
edg-pbs-utils 1.0.9-1.slc4 edg-pbs-utils-1.0.9-1.slc4.x86_64.rpm edg-pbs-utils
glite-TORQUE_client 3.1.1-0 glite-TORQUE_client-3.1.1-0.x86_64.rpm gLite metapackage (glite-TORQUE_client)
glite-version 3.1.0-1.slc4 glite-version-3.1.0-1.slc4.x86_64.rpm glite-version
glite-yaim-core 4.0.4-2 glite-yaim-core-4.0.4-2.noarch.rpm glite-yaim-core
glite-yaim-torque-client 4.0.1-1 glite-yaim-torque-client-4.0.1-1.noarch.rpm glite-yaim-torque-client module configures the TORQUE client.
torque-client 2.3.0-snap.200801151629.2cri.slc4 torque-client-2.3.0-snap.200801151629.2cri.slc4.x86_64.rpm client part of Torque
torque-mom 2.3.0-snap.200801151629.2cri.slc4 torque-mom-2.3.0-snap.200801151629.2cri.slc4.x86_64.rpm execution part of Torque
torque 2.3.0-snap.200801151629.2cri.slc4 torque-2.3.0-snap.200801151629.2cri.slc4.x86_64.rpm Tera-scale Open-source Resource and QUEue manager

The RPMs can be updated using yum via

Service reconfiguration after update

Service must be reconfigured.

Service restart after update

Service must be restarted.

How to apply the fix

  1. Update the RPMs (see above)
  2. Update configuration (see above)
  3. Restart the service if necessary (see above)